Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
Material:
Key ring 1.4310, natural finish
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.
On request:
Special versions and spacer rings.
Material:
Key ring 1.4310, natural finish
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.
On request:
Special versions and spacer rings.
Material:
Key ring 1.4310, natural finish
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.
On request:
Special versions and spacer rings.
Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic
Surface finish:
Pressure pin (steel) surface hardened and galvanized;
body blue galvanized
Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc.
In order to position, see 03330 for suitable eccentric bushes.
Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic
Surface finish:
Pressure pin (steel) surface hardened and galvanized;
body blue galvanized
Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc.
In order to position, see 03330 for suitable eccentric bushes.
Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic
Surface finish:
Pressure pin (steel) surface hardened and galvanized;
body blue galvanized
Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc.
In order to position, see 03330 for suitable eccentric bushes.
Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic
Surface finish:
Pressure pin (steel) surface hardened and galvanized;
body blue galvanized
Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc.
In order to position, see 03330 for suitable eccentric bushes.
Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Surface finish:
• Steel version, locking pin hardened:
black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened:
natural finish, locking pin ground
• Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Monroe carries a wide variety of Kipp Pins in many different sizes and specifications. For more information, please call or submit an RFQ.
(Kipp Original Design) /Asset/03094-99.jpg Monroe carries a wide variety of Kipp Pins in many different sizes and specifications. For more information, please call or submit an RFQ.
(Kipp Original Design) /Asset/03094-99.jpg
On request: Special versions.
(Kipp Original Design) Material:
-Steel quality class 5.8
Surface finish:
-Blue chromated
Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions.
We are an ISO 9001:2015 & AS9100D certified manufacturer of Ball Plungers and Spring Plungers (including Press Fit), Short Spring, and Slotted Drive Plungers (Plunger Accessories are also available). Many types available in metric and inch sizes and in a variety of materials including stainless steel, steel, thermoplastic and etc. We also offer many styles with locking element sizes to meet your needs.
/Asset/03330-120.jpg
We are an ISO 9001:2015 & AS9100D certified manufacturer of Ball Plungers and Spring Plungers (including Press Fit), Short Spring, and Slotted Drive Plungers (Plunger Accessories are also available). Many types available in metric and inch sizes and in a variety of materials including stainless steel, steel, thermoplastic and etc. We also offer many styles with locking element sizes to meet your needs.
We at Monroe touch your life every day in the house that you live in, the way you get to work, and how the things you buy are made. In business, since 1958 we make and supply thousands of items through industry leading stock and sell solutions. Monroe sales engineers have the experience and can do approach to offer solutions to your unique needs. If the specific product you need isn’t shown, let us know and we will make it, stock it, and deliver it as you need it.
(Kipp Original Design) /Asset/03330-03.jpg
OneMonroe provides custom manufacturing solutions to clients throughout the world. We can manufacture built-to-order parts, custom products and offer a wide variety of options to solve your problem. We can support high volumes and short-lead times.
Monroe Engineering Products is a full-service manufacturer of fabricated metal assemblies and hardware. We offer a diverse product line of off-the-shelf hardware and can custom manufacture our entire product lines to match your needs. We do vendor-managed inventory (vmi) on low-cost hardware items and manage larger fabrication programs from blueprint to delivery.
/Asset/CUSTOMQUOTE_BUTTON.jpg
