Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Item # |
IntegrationID |
Material |
Style |
L |
D |
H |
D2 |
L2 |
L1 |
D1 |
F x 30° |
SW |
---|---|---|---|---|---|---|---|---|---|---|---|---|
M65709 |
IntegrationID
N/A 77292 |
Material N/A Stainless Steel | Style N/A G | L N/A 33.00 mm | D N/A 3.00 mm | H N/A 5.00 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A 1/4-28 in | F x 30° N/A 0.80 mm | SW N/A |
M65693 |
IntegrationID
N/A 77293 |
Material N/A Stainless Steel | Style N/A G | L N/A 40.50 mm | D N/A 4.00 mm | H N/A 6.00 mm | D2 N/A 18.00 mm | L2 N/A 13.50 mm | L1 N/A 21.00 mm | D1 N/A 5/16-24 in | F x 30° N/A 1.00 mm | SW N/A |
M65697 |
IntegrationID
N/A 77294 |
Material N/A Stainless Steel | Style N/A G | L N/A 46.50 mm | D N/A 5.00 mm | H N/A 8.00 mm | D2 N/A 21.00 mm | L2 N/A 14.50 mm | L1 N/A 24.00 mm | D1 N/A 3/8-24 in | F x 30° N/A 1.30 mm | SW N/A |
M65699 |
IntegrationID
N/A 77295 |
Material N/A Stainless Steel | Style N/A G | L N/A 54.70 mm | D N/A 6.00 mm | H N/A 9 mm | D2 N/A 25.00 mm | L2 N/A 17.70 mm | L1 N/A 28.00 mm | D1 N/A 1/2-13 in | F x 30° N/A 1.80 mm | SW N/A |
M65701 |
IntegrationID
N/A 77296 |
Material N/A Stainless Steel | Style N/A G | L N/A 72.00 mm | D N/A 8.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A 5/8-11 in | F x 30° N/A 2.30 mm | SW N/A |
M65703 |
IntegrationID
N/A 77297 |
Material N/A Stainless Steel | Style N/A G | L N/A 79.00 mm | D N/A 10.00 mm | H N/A 15 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A 3/4-10 in | F x 30° N/A 2.80 mm | SW N/A |
M65705 |
IntegrationID
N/A 77298 |
Material N/A Stainless Steel | Style N/A G | L N/A 84.00 mm | D N/A 12.00 mm | H N/A 18 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A 3/4-16 in | F x 30° N/A 2.80 mm | SW N/A |
M65707 |
IntegrationID
N/A 77299 |
Material N/A Stainless Steel | Style N/A G | L N/A 104.00 mm | D N/A 16.00 mm | H N/A 24.00 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A 1-8 in | F x 30° N/A 3.20 mm | SW N/A |
M65727 |
IntegrationID
N/A 77300 |
Material N/A Stainless Steel | Style N/A H | L N/A 33.00 mm | D N/A 3.00 mm | H N/A 5.00 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A 1/4-28 in | F x 30° N/A 0.80 mm | SW N/A 7/16 in |
M65711 |
IntegrationID
N/A 77301 |
Material N/A Stainless Steel | Style N/A H | L N/A 40.50 mm | D N/A 4.00 mm | H N/A 6.00 mm | D2 N/A 18.00 mm | L2 N/A 13.50 mm | L1 N/A 21.00 mm | D1 N/A 5/16-24 in | F x 30° N/A 1.00 mm | SW N/A 1/2 in |
M65715 |
IntegrationID
N/A 77302 |
Material N/A Stainless Steel | Style N/A H | L N/A 46.50 mm | D N/A 5.00 mm | H N/A 8.00 mm | D2 N/A 21.00 mm | L2 N/A 14.50 mm | L1 N/A 24.00 mm | D1 N/A 3/8-24 in | F x 30° N/A 1.30 mm | SW N/A 9/16 in |
M65717 |
IntegrationID
N/A 77303 |
Material N/A Stainless Steel | Style N/A H | L N/A 54.70 mm | D N/A 6.00 mm | H N/A 9 mm | D2 N/A 25.00 mm | L2 N/A 17.70 mm | L1 N/A 28.00 mm | D1 N/A 1/2-13 in | F x 30° N/A 1.80 mm | SW N/A 3/4 in |
M65719 |
IntegrationID
N/A 77304 |
Material N/A Stainless Steel | Style N/A H | L N/A 72.00 mm | D N/A 8.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A 5/8-11 in | F x 30° N/A 2.30 mm | SW N/A 15/16 in |
M65721 |
IntegrationID
N/A 77305 |
Material N/A Stainless Steel | Style N/A H | L N/A 79.00 mm | D N/A 10.00 mm | H N/A 15 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A 3/4-10 in | F x 30° N/A 2.80 mm | SW N/A 1 1/8 in |
M65723 |
IntegrationID
N/A 77306 |
Material N/A Stainless Steel | Style N/A H | L N/A 84.00 mm | D N/A 12.00 mm | H N/A 18 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A 3/4-16 in | F x 30° N/A 2.80 mm | SW N/A 1 1/8 in |
M65725 |
IntegrationID
N/A 77307 |
Material N/A Stainless Steel | Style N/A H | L N/A 104.00 mm | D N/A 16.00 mm | H N/A 24.00 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A 1-8 in | F x 30° N/A 3.20 mm | SW N/A 1 1/2 in |
NEED custom manufacturing? WE are the experts. REQUEST RFQ