Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
On request:
Special versions.
Item # |
IntegrationID |
Material |
Style |
L |
D |
H |
D2 |
L2 |
L1 |
D1 |
F x 30° |
SW |
---|---|---|---|---|---|---|---|---|---|---|---|---|
M65624 |
IntegrationID
N/A 77443 |
Material N/A Stainless Steel | Style N/A G | L N/A 32.00 mm | D N/A 3.00 mm | H N/A 3.50 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A M6 X 0.75 mm | F x 30° N/A 0.80 mm | SW N/A |
M65608 |
IntegrationID
N/A 77444 |
Material N/A Stainless Steel | Style N/A G | L N/A 39.00 mm | D N/A 4.00 mm | H N/A 4.00 mm | D2 N/A 18.00 mm | L2 N/A 14.00 mm | L1 N/A 21.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A |
M65612 |
IntegrationID
N/A 77445 |
Material N/A Stainless Steel | Style N/A G | L N/A 44.00 mm | D N/A 5.00 mm | H N/A 5.00 mm | D2 N/A 21.00 mm | L2 N/A 15.00 mm | L1 N/A 24.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A |
M65614 |
IntegrationID
N/A 77446 |
Material N/A Stainless Steel | Style N/A G | L N/A 52.00 mm | D N/A 6.00 mm | H N/A 6.00 mm | D2 N/A 25.00 mm | L2 N/A 18.00 mm | L1 N/A 28.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | SW N/A |
M65616 |
IntegrationID
N/A 77447 |
Material N/A Stainless Steel | Style N/A G | L N/A 68.00 mm | D N/A 8.00 mm | H N/A 8.00 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | SW N/A |
M65618 |
IntegrationID
N/A 77448 |
Material N/A Stainless Steel | Style N/A G | L N/A 74.00 mm | D N/A 10.00 mm | H N/A 10 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A |
M65620 |
IntegrationID
N/A 77449 |
Material N/A Stainless Steel | Style N/A G | L N/A 78.00 mm | D N/A 12.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A |
M65622 |
IntegrationID
N/A 77450 |
Material N/A Stainless Steel | Style N/A G | L N/A 96.00 mm | D N/A 16.00 mm | H N/A 16 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A M24 X 2.00 mm | F x 30° N/A 3.20 mm | SW N/A |
M65642 |
IntegrationID
N/A 77451 |
Material N/A Stainless Steel | Style N/A H | L N/A 32.00 mm | D N/A 3.00 mm | H N/A 3.50 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A M6 X 0.75 mm | F x 30° N/A 0.80 mm | SW N/A 10 mm |
M65626 |
IntegrationID
N/A 77452 |
Material N/A Stainless Steel | Style N/A H | L N/A 39.00 mm | D N/A 4.00 mm | H N/A 4.00 mm | D2 N/A 18.00 mm | L2 N/A 14.00 mm | L1 N/A 21.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A 13 mm |
M65630 |
IntegrationID
N/A 77453 |
Material N/A Stainless Steel | Style N/A H | L N/A 44.00 mm | D N/A 5.00 mm | H N/A 5.00 mm | D2 N/A 21.00 mm | L2 N/A 15.00 mm | L1 N/A 24.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A 17 mm |
M65632 |
IntegrationID
N/A 77454 |
Material N/A Stainless Steel | Style N/A H | L N/A 52.00 mm | D N/A 6.00 mm | H N/A 6.00 mm | D2 N/A 25.00 mm | L2 N/A 18.00 mm | L1 N/A 28.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | SW N/A 19 mm |
M65634 |
IntegrationID
N/A 77455 |
Material N/A Stainless Steel | Style N/A H | L N/A 68.00 mm | D N/A 8.00 mm | H N/A 8.00 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | SW N/A 24 mm |
M65636 |
IntegrationID
N/A 77456 |
Material N/A Stainless Steel | Style N/A H | L N/A 74.00 mm | D N/A 10.00 mm | H N/A 10 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A 30 mm |
M65638 |
IntegrationID
N/A 77457 |
Material N/A Stainless Steel | Style N/A H | L N/A 78.00 mm | D N/A 12.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A 30 mm |
M65640 |
IntegrationID
N/A 77458 |
Material N/A Stainless Steel | Style N/A H | L N/A 96.00 mm | D N/A 16.00 mm | H N/A 16 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A M24 X 2.00 mm | F x 30° N/A 3.20 mm | SW N/A 36 mm |
NEED custom manufacturing? WE are the experts. REQUEST RFQ