Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Item # |
IntegrationID |
Material |
Style |
L |
D |
H |
D2 |
L2 |
L1 |
D1 |
F x 30° |
SW |
---|---|---|---|---|---|---|---|---|---|---|---|---|
M65708 |
IntegrationID
N/A 77340 |
Material N/A Stainless Steel | Style N/A G | L N/A 33.00 mm | D N/A 3.00 mm | H N/A 5.00 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A M6 X 0.75 mm | F x 30° N/A 0.80 mm | SW N/A |
M65692 |
IntegrationID
N/A 77341 |
Material N/A Stainless Steel | Style N/A G | L N/A 41.00 mm | D N/A 4.00 mm | H N/A 6.00 mm | D2 N/A 18.00 mm | L2 N/A 14.00 mm | L1 N/A 21.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.00 mm | SW N/A |
M65696 |
IntegrationID
N/A 77342 |
Material N/A Stainless Steel | Style N/A G | L N/A 47.00 mm | D N/A 5.00 mm | H N/A 8.00 mm | D2 N/A 21.00 mm | L2 N/A 15.00 mm | L1 N/A 24.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A |
M65698 |
IntegrationID
N/A 77343 |
Material N/A Stainless Steel | Style N/A G | L N/A 55.00 mm | D N/A 6.00 mm | H N/A 9 mm | D2 N/A 25.00 mm | L2 N/A 18.00 mm | L1 N/A 28.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | SW N/A |
M65700 |
IntegrationID
N/A 77344 |
Material N/A Stainless Steel | Style N/A G | L N/A 72.00 mm | D N/A 8.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | SW N/A |
M65702 |
IntegrationID
N/A 77345 |
Material N/A Stainless Steel | Style N/A G | L N/A 79.00 mm | D N/A 10.00 mm | H N/A 15 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A |
M65704 |
IntegrationID
N/A 77346 |
Material N/A Stainless Steel | Style N/A G | L N/A 84.00 mm | D N/A 12.00 mm | H N/A 18 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A |
M65706 |
IntegrationID
N/A 77347 |
Material N/A Stainless Steel | Style N/A G | L N/A 104.00 mm | D N/A 16.00 mm | H N/A 24.00 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A M24 X 2.00 mm | F x 30° N/A 3.20 mm | SW N/A |
M65726 |
IntegrationID
N/A 77348 |
Material N/A Stainless Steel | Style N/A H | L N/A 33.00 mm | D N/A 3.00 mm | H N/A 5.00 mm | D2 N/A 14.00 mm | L2 N/A 11.00 mm | L1 N/A 17.00 mm | D1 N/A M6 X 0.75 mm | F x 30° N/A 0.80 mm | SW N/A 10 mm |
M65710 |
IntegrationID
N/A 77349 |
Material N/A Stainless Steel | Style N/A H | L N/A 41.00 mm | D N/A 4.00 mm | H N/A 6.00 mm | D2 N/A 18.00 mm | L2 N/A 14.00 mm | L1 N/A 21.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.00 mm | SW N/A 13 mm |
M65714 |
IntegrationID
N/A 77350 |
Material N/A Stainless Steel | Style N/A H | L N/A 47.00 mm | D N/A 5.00 mm | H N/A 8.00 mm | D2 N/A 21.00 mm | L2 N/A 15.00 mm | L1 N/A 24.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | SW N/A 17 mm |
M65716 |
IntegrationID
N/A 77351 |
Material N/A Stainless Steel | Style N/A H | L N/A 55.00 mm | D N/A 6.00 mm | H N/A 9 mm | D2 N/A 25.00 mm | L2 N/A 18.00 mm | L1 N/A 28.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | SW N/A 19 mm |
M65718 |
IntegrationID
N/A 77352 |
Material N/A Stainless Steel | Style N/A H | L N/A 72.00 mm | D N/A 8.00 mm | H N/A 12 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 36.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | SW N/A 24 mm |
M65720 |
IntegrationID
N/A 77353 |
Material N/A Stainless Steel | Style N/A H | L N/A 79.00 mm | D N/A 10.00 mm | H N/A 15 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 40.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A 30 mm |
M65722 |
IntegrationID
N/A 77354 |
Material N/A Stainless Steel | Style N/A H | L N/A 84.00 mm | D N/A 12.00 mm | H N/A 18 mm | D2 N/A 33.00 mm | L2 N/A 24.00 mm | L1 N/A 42.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | SW N/A 30 mm |
M65724 |
IntegrationID
N/A 77355 |
Material N/A Stainless Steel | Style N/A H | L N/A 104.00 mm | D N/A 16.00 mm | H N/A 24.00 mm | D2 N/A 40.00 mm | L2 N/A 30.00 mm | L1 N/A 50.00 mm | D1 N/A M24 X 2.00 mm | F x 30° N/A 3.20 mm | SW N/A 36 mm |
NEED custom manufacturing? WE are the experts. REQUEST RFQ