CFS Hinges - Built-in Safety Switch
Plastic Hinges
High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin.
-
Fitting by means of:
- 2 pairs of nickel-plated brass bushings with tapped hole
- 2 pairs of nickel-plated steel studs
- 2 pairs of through holes for hexagonal-head screws Features
- Rotation angle: max 270°, between 0° and -90° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing
- The rotation stud pin, fully inserted into the hinge body, cannot be extracted, preventing from any hinge tampering. This characteristic makes the hinge particularly suitable on structures or equipment requiring protection against intrusion. Elesa Original Design.
Item # |
IntegrationID |
L |
B |
F |
H |
b2 |
f2 |
f3 |
L1 |
h3 |
h4 |
d4 |
b3 |
h1 |
h2 |
d3 |
d |
f1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 426531 |
IntegrationID
N/A 82593 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A | f2 N/A | f3 N/A | L1 N/A 4.33 in | h3 N/A | h4 N/A 0.55 in | d4 N/A 0.49 in | b3 N/A | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A 0.26 in | d N/A 0.31 in | f1 N/A 1.77 in |
| 426521 |
IntegrationID
N/A 82594 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A | f2 N/A | f3 N/A | L1 N/A 4.33 in | h3 N/A | h4 N/A 0.55 in | d4 N/A 0.49 in | b3 N/A | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A 0.26 in | d N/A 0.31 in | f1 N/A 1.77 in |
| 426533 |
IntegrationID
N/A 82595 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A | f2 N/A 2.03 in | f3 N/A 0.89 in | L1 N/A 4.33 in | h3 N/A | h4 N/A 0.55 in | d4 N/A 0.49 in | b3 N/A | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A 0.26 in | d N/A 0.31 in | f1 N/A 1.77 in |
| 426523 |
IntegrationID
N/A 82596 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A | f2 N/A 2.03 in | f3 N/A 0.89 in | L1 N/A 4.33 in | h3 N/A | h4 N/A 0.55 in | d4 N/A 0.49 in | b3 N/A | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A 0.26 in | d N/A 0.31 in | f1 N/A 1.77 in |
| 426592 |
IntegrationID
N/A 82597 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A 0.26 in | f2 N/A | f3 N/A | L1 N/A 4.33 in | h3 N/A 0.16 in | h4 N/A 0.55 in | d4 N/A | b3 N/A 0.41 in | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A | d N/A 0.31 in | f1 N/A 1.57 in |
| 426582 |
IntegrationID
N/A 82598 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A 0.26 in | f2 N/A | f3 N/A | L1 N/A 4.33 in | h3 N/A 0.16 in | h4 N/A 0.55 in | d4 N/A | b3 N/A 0.41 in | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A | d N/A 0.31 in | f1 N/A 1.57 in |
| 426594 |
IntegrationID
N/A 82599 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A 0.26 in | f2 N/A 2.03 in | f3 N/A 0.89 in | L1 N/A 4.33 in | h3 N/A 0.16 in | h4 N/A 0.55 in | d4 N/A | b3 N/A 0.41 in | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A | d N/A 0.31 in | f1 N/A 1.57 in |
| 426584 |
IntegrationID
N/A 82600 |
L N/A 2.05 in | B N/A 2.76 in | F N/A 1.34 in | H N/A 0.63 in | b2 N/A 0.26 in | f2 N/A 2.03 in | f3 N/A 0.89 in | L1 N/A 4.33 in | h3 N/A 0.16 in | h4 N/A 0.55 in | d4 N/A | b3 N/A 0.41 in | h1 N/A 0.31 in | h2 N/A 0.30 in | d3 N/A | d N/A 0.31 in | f1 N/A 1.57 in |
