Leveling Pads with Vibration Absorption - Metric
Level Pads (3 Styles)
Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel
Stainless steel version: pressure foot and ball element in stainless steel
Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish
Stainless steel version: natural finish
Material:
Surface finish:
Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).
Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.
Item # |
IntegrationID |
Material |
D2 |
D3 |
H2 |
H1 |
T |
D1 |
SW |
H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) |
Load capacity (under pressure of 0.4 N/mm²) |
Max Load |
Stud Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M66785 |
IntegrationID
N/A 78145 |
Material N/A Steel | D2 N/A 32.00 mm | D3 N/A 31.00 mm | H2 N/A 5.00 mm | H1 N/A 22.00 mm | T N/A 10.00 mm | D1 N/A M10 mm | SW N/A 17 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 212 N | Max Load N/A | Stud Length N/A |
| M66786 |
IntegrationID
N/A 78146 |
Material N/A Steel | D2 N/A 40.00 mm | D3 N/A 31.00 mm | H2 N/A 6.00 mm | H1 N/A 26.00 mm | T N/A 12.00 mm | D1 N/A M12 mm | SW N/A 19 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 212 N | Max Load N/A | Stud Length N/A |
| M66787 |
IntegrationID
N/A 78147 |
Material N/A Steel | D2 N/A 50.00 mm | D3 N/A 41.00 mm | H2 N/A 7.0 mm | H1 N/A 32.00 mm | T N/A 14.00 mm | D1 N/A M16 mm | SW N/A 24 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 435 N | Max Load N/A | Stud Length N/A |
| M66788 |
IntegrationID
N/A 78148 |
Material N/A Steel | D2 N/A 60.00 mm | D3 N/A 50.00 mm | H2 N/A 8.00 mm | H1 N/A 42.00 mm | T N/A 18.00 mm | D1 N/A M20 mm | SW N/A 30 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 705 N | Max Load N/A | Stud Length N/A |
| M66793 |
IntegrationID
N/A 78149 |
Material N/A Stainless Steel | D2 N/A 32.00 mm | D3 N/A 31.00 mm | H2 N/A 5.00 mm | H1 N/A 22.00 mm | T N/A 10.00 mm | D1 N/A M10 mm | SW N/A 17 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 212 N | Max Load N/A | Stud Length N/A |
| M66794 |
IntegrationID
N/A 78150 |
Material N/A Stainless Steel | D2 N/A 40.00 mm | D3 N/A 31.00 mm | H2 N/A 6.00 mm | H1 N/A 26.00 mm | T N/A 12.00 mm | D1 N/A M12 mm | SW N/A 19 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 212 N | Max Load N/A | Stud Length N/A |
| M66795 |
IntegrationID
N/A 78151 |
Material N/A Stainless Steel | D2 N/A 50.00 mm | D3 N/A 41.00 mm | H2 N/A 7.0 mm | H1 N/A 32.00 mm | T N/A 14.00 mm | D1 N/A M16 mm | SW N/A 24 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 435 N | Max Load N/A | Stud Length N/A |
| M66796 |
IntegrationID
N/A 78152 |
Material N/A Stainless Steel | D2 N/A 60.00 mm | D3 N/A 50.00 mm | H2 N/A 8.00 mm | H1 N/A 42.00 mm | T N/A 18.00 mm | D1 N/A M20 mm | SW N/A 30 mm | H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm | Load capacity (under pressure of 0.4 N/mm²) N/A 705 N | Max Load N/A | Stud Length N/A |
