Material:
Surface finish:
Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).
Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.
Unit of Measure
Material |
N/A Stainless Steel |
D2 |
N/A 60.00 mm |
D3 |
N/A 50.00 mm |
H2 |
N/A 8.00 mm |
H1 |
N/A 42.00 mm |
T |
N/A 18.00 mm |
D1 |
N/A M20 mm |
SW |
N/A 30 mm |
H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) |
N/A 8 / 6.8 / 5.9 mm |
Load capacity (under pressure of 0.4 N/mm²) |
N/A 705 N |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
