Alloy Anchor Shackle
Shackles (3 Styles)
Screw Pin Anchor/Chain Shackles allow quick and easy removal of the screw pin and can be useful in applications where the shackle is frequently removed, but not so much in applications where the pin is subject to torque or twisting.
Formula:- All shackles meet or exceed Federal Specification RRC-271D
- Working Load Limit and traceability codes shown as permanent marking on body and pin
- Available in painted, galvanized and self-colored finishes (Dacromate coating upon special request only)
- All shackles have alloy quenched and tempered pins
- Shackles exhibit extreme deformation before failure (Independent lab verified)
- Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order
- Special products engineering available to fit your special lifting, tie down, and pulling needs
- Design factor 5:1
Item # |
Item Name |
IntegrationID |
Pin Diameter |
D - Width |
E - Head Diameter |
W - Opening |
R - Outer Head Diameter |
L - Clearance |
B - Opening (Min) |
Working Load Limit |
|---|---|---|---|---|---|---|---|---|---|---|
| M650A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13505 |
Pin Diameter N/A 0.630 in | D - Width N/A 0.50 in | E - Head Diameter N/A 0.7 in | W - Opening N/A 0.84 in | R - Outer Head Diameter N/A 1.34 in | L - Clearance N/A 1.94 in | B - Opening (Min) N/A 1.38 in | Working Load Limit N/A 3.30 Ton |
| M651A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13506 |
Pin Diameter N/A 0.75 in | D - Width N/A 0.63 in | E - Head Diameter N/A 0.83 in | W - Opening N/A 1.06 in | R - Outer Head Diameter N/A 1.66 in | L - Clearance N/A 2.41 in | B - Opening (Min) N/A 1.63 in | Working Load Limit N/A 5.00 Ton |
| M652A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13507 |
Pin Diameter N/A 0.880 in | D - Width N/A 0.75 in | E - Head Diameter N/A 0.95 in | W - Opening N/A 1.28 in | R - Outer Head Diameter N/A 1.94 in | L - Clearance N/A 2.84 in | B - Opening (Min) N/A 1.89 in | Working Load Limit N/A 7.00 Ton |
| M653A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13508 |
Pin Diameter N/A 1.000 in | D - Width N/A 0.88 in | E - Head Diameter N/A 1.09 in | W - Opening N/A 1.44 in | R - Outer Head Diameter N/A 2.14 in | L - Clearance N/A 3.31 in | B - Opening (Min) N/A 2.06 in | Working Load Limit N/A 9.50 Ton |
| M654A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13509 |
Pin Diameter N/A 1.130 in | D - Width N/A 1.00 in | E - Head Diameter N/A 1.22 in | W - Opening N/A 1.72 in | R - Outer Head Diameter N/A 2.44 in | L - Clearance N/A 3.75 in | B - Opening (Min) N/A 2.52 in | Working Load Limit N/A 12.50 Ton |
| M655A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13510 |
Pin Diameter N/A 1.250 in | D - Width N/A 1.13 in | E - Head Diameter N/A 1.36 in | W - Opening N/A 1.84 in | R - Outer Head Diameter N/A 2.66 in | L - Clearance N/A 4.02 in | B - Opening (Min) N/A 2.69 in | Working Load Limit N/A 15.00 Ton |
| M656A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13511 |
Pin Diameter N/A 1.380 in | D - Width N/A 1.25 in | E - Head Diameter N/A 1.52 in | W - Opening N/A 2.03 in | R - Outer Head Diameter N/A 3.15 in | L - Clearance N/A 4.63 in | B - Opening (Min) N/A 2.88 in | Working Load Limit N/A 18.00 Ton |
| M666A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13512 |
Pin Diameter N/A 1.500 in | D - Width N/A 1.38 in | E - Head Diameter N/A 1.65 in | W - Opening N/A 2.25 in | R - Outer Head Diameter N/A 3.25 in | L - Clearance N/A 5.19 in | B - Opening (Min) N/A 3.25 in | Working Load Limit N/A 21.00 Ton |
| M657A | N/A Alloy Anchor Shackles |
IntegrationID
N/A 13513 |
Pin Diameter N/A 1.630 in | D - Width N/A 1.50 in | E - Head Diameter N/A 1.77 in | W - Opening N/A 2.41 in | R - Outer Head Diameter N/A 3.5 in | L - Clearance N/A 5.63 in | B - Opening (Min) N/A 3.5 in | Working Load Limit N/A 25.00 Ton |
