Screw Pin Anchor/Chain Shackles allow quick and easy removal of the screw pin and can be useful in applications where the shackle is frequently removed, but not so much in applications where the pin is subject to torque or twisting.
Formula:- All shackles meet or exceed Federal Specification RRC-271D
- Working Load Limit and traceability codes shown as permanent marking on body and pin
- Available in painted, galvanized and self-colored finishes (Dacromate coating upon special request only)
- All shackles have alloy quenched and tempered pins
- Shackles exhibit extreme deformation before failure (Independent lab verified)
- Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order
- Special products engineering available to fit your special lifting, tie down, and pulling needs
- Design factor 5:1
Unit of Measure
Pin Diameter |
N/A 1.630 in |
D - Width |
N/A 1.50 in |
E - Head Diameter |
N/A 1.77 in |
W - Opening |
N/A 2.41 in |
R - Outer Head Diameter |
N/A 3.5 in |
L - Clearance |
N/A 5.63 in |
B - Opening (Min) |
N/A 3.5 in |
Working Load Limit |
N/A 25.00 Ton |
Country of Origin |
N/A US |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
