• CM Latches with Knob
  • CM Latches with Knob

High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black color with matte finish. AISI 303 stainless steel rotation pin.

Fitting by means of:

  • 2 pairs of nickel-plated brass bushings with tapped hole
  • 2 pairs of nickel-plated steel studs
  • 2 pairs of through holes for countersunk head screws
  • 2 pairs of through holes for cylindrical head screws
  • 1 pair of nickel-plated brass bushings with tapped hole and 1 pair of nickel-plated steel studs
  • 1 pair of nickel-plated brass bushings with tapped hole and 1 pair of through holes for countersunk head screws.
  • 1 pair of nickel-plated brass bushings with tapped hole and 1 pair of through holes for cylindrical head screws
  • 1 pair of nickel-plated steel studs and 1 pair of through holes for cylindrical head screws
  • 1 pair of nickel-plated steel studs and 1 pair of through holes for countersunk head screws

    Application example

    Rotation angle: max 220°, between 0° and -40° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).

    Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance. Elesa Original Design.
    • 1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1 
    Request Information Compare Items
    Clear Filter

    Item #

    IntegrationID

    D

    H

    L2

    L1

    l

    h

    Diameter

    Stud Length

    N/A
    82619         		N/A 1.18 in N/A 1.26 in N/A 0.79 in N/A 0.79 in N/A 0.63 in N/A 0.59 in N/A N/A
    N/A
    82620         		N/A 1.18 in N/A 1.400 in N/A 0.98 in N/A 0.79 in N/A 0.63 in N/A 0.59 in N/A N/A
    N/A
    82621         		N/A 1.42 in N/A 1.26 in N/A 0.98 in N/A 0.98 in N/A 0.63 in N/A 0.91 in N/A N/A
    N/A
    82622         		N/A 1.42 in N/A 1.400 in N/A 1.18 in N/A 0.98 in N/A 0.63 in N/A 0.91 in N/A N/A
    1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1