CKE Locking Bolt
(2)High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. Nickel-plated steel rotation pin.
Fitting by means of 2 through holes for M6 countersunk head screws.
With black technopolymer centering inserts, for doweling with 8 or 10 mm slots.
Rotation angle: max 270°, between 0° and -90° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance.
This model can be used with aluminum section from 30mm up to 60 mm, also combining different dimensions (for example door post of 45 mm and door of 30 mm. Elesa Original Design.
CLT Latches with Handle
(12)High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation stud pin.
Fitting by means of 2 pairs of through holes for cylindrical head screws
Rotation angle: max 270°, between 0° and -90° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance. Elesa Original Design.
Latches with Fold-Away Knob
(4) High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black standard color with matte finish. AISI 303 stainless steel rotation pin.Fitting by means of:
Rotation angle: max 210°, between 0° and -15° and between 0° and 195° (90° = where the two interconnected surfaces are at a right angle). Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing). Elesa Original Design.
CM Latches with Knob
(4)High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black color with matte finish. AISI 303 stainless steel rotation pin.
Fitting by means of:
Application example
Rotation angle: max 220°, between 0° and -40° and between 0° and 180° (0° = where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance. Elesa Original Design.
Custom MFG of Item
OneMonroe provides custom manufacturing solutions to clients throughout the world. We can manufacture built-to-order parts, custom products and offer a wide variety of options to solve your problem. We can support high volumes and short-lead times.
Monroe Engineering Products is a full-service manufacturer of fabricated metal assemblies and hardware. We offer a diverse product line of off-the-shelf hardware and can custom manufacture our entire product lines to match your needs. We do vendor-managed inventory (vmi) on low-cost hardware items and manage larger fabrication programs from blueprint to delivery.
/Asset/CUSTOMQUOTE_BUTTON.jpg