Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 

Item #

IntegrationID

Length

Type

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1162-S N/A
100134
N/A 1.50 in N/A B N/A 0.048 in N/A 1.00 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1166-S N/A
100135
N/A 1.50 in N/A B N/A 0.048 in N/A 1.25 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1170-S N/A
100136
N/A 2.00 in N/A B N/A 0.048 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1174-S N/A
100137
N/A 2.50 in N/A B N/A 0.048 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1138-S N/A
100138
N/A 2.00 in N/A B N/A 0.06 in N/A 1.25 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1142-S N/A
100139
N/A 2.00 in N/A B N/A 0.06 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1146-S N/A
100140
N/A 2.50 in N/A B N/A 0.06 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1151-S N/A
100141
N/A 3.00 in N/A B N/A 0.06 in N/A 2.00 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1152-S N/A
100142
N/A 3.00 in N/A B N/A 0.06 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1158-S N/A
100143
N/A 4.00 in N/A B N/A 0.06 in N/A 3.00 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1122-S N/A
100144
N/A 2.00 in N/A B N/A 0.075 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1126-S N/A
100145
N/A 2.50 in N/A B N/A 0.075 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1130-S N/A
100146
N/A 3.00 in N/A B N/A 0.075 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1133-S N/A
100147
N/A 4.00 in N/A B N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1098-S N/A
100148
N/A 2.00 in N/A B N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1102-S N/A
100149
N/A 2.50 in N/A B N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1106-S N/A
100150
N/A 2.50 in N/A B N/A 0.09 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1110-S N/A
100151
N/A 3.00 in N/A B N/A 0.09 in N/A 2.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1114-S N/A
100152
N/A 3.00 in N/A B N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1118-S N/A
100153
N/A 4.00 in N/A B N/A 0.09 in N/A 4.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1082-S N/A
100154
N/A 4.00 in N/A B N/A 0.120 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1086-S N/A
100155
N/A 4.00 in N/A B N/A 0.120 in N/A 4.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1090-S N/A
100156
N/A 5 in N/A B N/A 0.120 in N/A 5.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1094-S N/A
100157
N/A 6.00 in N/A B N/A 0.120 in N/A 6.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1178-S N/A
100158
N/A 4.00 in N/A B N/A 0.187 in N/A 3.00 in N/A 0.375 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 

Are you looking for a quote?

About Monroe
About Monroe

Experience

Over 60 years of manufacturing experience to best server our customers

Read More >>

Our Custom Manufacturing

Capabilities

Monroe provides custom manufacturing solutions to clients throughout the world

Read More >>

See ways we provide value

Values

Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

Read More >>

Commited to Quality

Commitment

Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

Read More >>