• Made from phenolic based duroplast, these 5 lobe knobs are radiused and polished to provide maximum beauty and comfort
  • Insert material is available in brass, steel, or stainless steel
  • Insert is molded in allowing for a slight shoulder effect so the torque is taken up by the insert and not the plastic face

    ELESA Original Design.
  • 1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1 
    Clear Filter

    Mounting Type

    Thread

    Diameter

    Item #

    CAD

    IntegrationID

    Material

    d

    Mounting Type

    Thread

    Height

    B - Hub Diameter

    D - Hub Projection (DS)

    Insert - Material

    S

    Diameter

    N/A N/A
    8433
    N/A Duroplast N/A 11.00 mm N/A Tapped N/A M6 N/A 23.00 mm N/A 19.00 mm N/A 12.00 mm N/A Stainless Steel N/A 12.00 mm N/A 1.26 in (32 mm)
    N/A N/A
    8434
    N/A Duroplast N/A 12.00 mm N/A Tapped N/A M8 N/A 27.00 mm N/A 21.00 mm N/A 13.00 mm N/A Stainless Steel N/A 13.00 mm N/A 1.57 in (40 mm)
    N/A N/A
    8435
    N/A Duroplast N/A 14.00 mm N/A Tapped N/A M10 N/A 33.00 mm N/A 25.00 mm N/A 17.00 mm N/A Stainless Steel N/A 17.00 mm N/A 1.97 in (50 mm)
    N/A N/A
    8436
    N/A Duroplast N/A 17.00 mm N/A Tapped N/A M12 N/A 37.00 mm N/A 27.00 mm N/A 20.00 mm N/A Stainless Steel N/A 20.00 mm N/A 2.36 in (60 mm)
    1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1