Economy - Threaded Insert Thru Hole - Inch

Material is polypropylene (PP) with molded in brass insert

Economy and value best describes this plastic 5 lobe knob

Textured surface with no sharp edges for a positive grip

Colors available for sufficient quantities

1 - 5 of 5 | Results Per Page | View | Unit of Measure

Request Information Compare Items Search by Specification

Clear Filter

Item #	CAD	IntegrationID	Material	Thread	Height	B - Hub Diameter	D - Hub Projection (DS)	Diameter

MA-0175	N/A	N/A 7741	N/A Polypropylene	N/A 3/8-16	N/A 0.78 in	N/A 0.84 in	N/A 0.28 in	N/A 2.25 in (57.2 mm)
MA-0177	N/A	N/A 7742	N/A Polypropylene	N/A 5/16-18	N/A 0.78 in	N/A 0.84 in	N/A 0.28 in	N/A 2.25 in (57.2 mm)
MA-0185	N/A	N/A 7743	N/A Polypropylene	N/A 3/8-16	N/A 0.78 in	N/A 0.84 in	N/A 0.28 in	N/A 2.25 in (57.2 mm)
MA-0186	N/A	N/A 7744	N/A Polypropylene	N/A 1/4-20	N/A 0.78 in	N/A 0.84 in	N/A 0.28 in	N/A 2.25 in (57.2 mm)
MA-0187	N/A	N/A 7745	N/A Polypropylene	N/A 5/16-18	N/A 0.78 in	N/A 0.84 in	N/A 0.28 in	N/A 2.25 in (57.2 mm)