Adjustable Handles CastersCrank Handles FastenersFine Adjusters Handles Handwheels Hinges Hoist Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding Gaga codePh: 877-740-2007
Fax: 800-453-9683

Hours of Operation:
8am - 6pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

General Terms & Conditions of Sale of Goods

General Supplier
Terms & Conditions 
Search Catalog
        
 All Categories    Steel Insert - Knurled Knob with Flange and No Flange - Inch
All Categories > Industrial Knobs > Instrument Knobs > Knurled Instrument Knobs > Steel Insert - Knurled Knob with Flange and No Flange - Inch > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Steel Insert - Knurled Knob with Flange and No Flange - Inch

 
Check up to five results to perform an action.


Knurled rim knobs are made to obtain a firm grip and are used to control devices. The small ridge patterns are rolled or cut into the material for a non-slip grip. They come in a wide variety of different styles and are often used on applications where the operator may be in contact with damp or wet surfaces. The knurled rim helps to prevent fingers from slipping to ensure positive tightening. They are also available in a handle form for use with a longer or larger surface area that requires using other directional movements. A rugged fiber reinforced knob of black plastic with steel insert. The light gray cap can be removed by pressing slightly with fingers on outer edge and replaced by pushing on center of cap into place. Recess of knob under the cap hides the installation device. Knobs are stocked without flange attached. Attaching flange to knob is easily accomplished by three self threading rivets that are supplied. Nominal machine work such as keyways, set screw or dowel pin holes available upon request. ELESA Original Design

Page Updated6/19/2018


   
  Results 1 - 15 of 15 Unit of Measure: Imperial Metric Both 1 

Item #

CAD

Type

Material

L

h

d3

Z

T - Thread

Height

C - Mounting Hole

U - Tapped Depth

Insert Material

Protrusion

Y

Diameter

Stud Length

Alternate P/N

Product Guides
M-29725 CAD Icon (for items table) No Flange - Size 1 Fiber-Reinforced Plastic N/A 0.59 in 0.95 in N/A N/A 1.14 in 0.31 in 0.63 in Steel 0.01 in N/A 1.46 in (37.1 mm) N/A 29725 Knob Guide
29727A CAD Icon (for items table) No Flange - Size 2 Fiber-Reinforced Plastic N/A 0.87 in 1.26 in N/A N/A 1.38 in 0.38 in 0.87 in Steel 0.01 in N/A 1.89 in (48 mm) N/A N/A Knob Guide
M-29729 CAD Icon (for items table) No Flange - Size 3 Fiber-Reinforced Plastic N/A 1.02 in 1.65 in N/A N/A 1.61 in 0.50 in 1.06 in Steel 0.01 in N/A 2.28 in (57.9 mm) N/A 29729 Knob Guide
M-29735 CAD Icon (for items table) Pointer Flange - Size 1 Fiber-Reinforced Plastic 0.27 in 0.59 in 0.95 in 1.77 in N/A N/A 0.31 in 0.63 in Steel N/A 1.42 in 1.46 in (37.1 mm) N/A 29735 Knob Guide
M-29737 CAD Icon (for items table) Pointer Flange - Size 2 Fiber-Reinforced Plastic 0.31 in 0.87 in 1.26 in 2.17 in N/A N/A 0.38 in 0.87 in Steel N/A 1.69 in 1.89 in (48 mm) N/A 29737 Knob Guide
29739 CAD Icon (for items table) Pointer Flange - Size 3 Fiber-Reinforced Plastic 0.43 in 1.02 in 1.65 in 2.76 in N/A N/A 0.50 in 1.06 in Steel N/A 2.05 in 2.28 in (57.9 mm) N/A N/A Knob Guide
29745 CAD Icon (for items table) Blank Flange - Size 1 Fiber-Reinforced Plastic 0.27 in 0.59 in 0.95 in 1.77 in N/A N/A 0.31 in 0.63 in Steel N/A 1.42 in 1.46 in (37.1 mm) N/A N/A Knob Guide
M-29747 CAD Icon (for items table) Blank Flange - Size 2 Fiber-Reinforced Plastic 0.31 in 0.87 in 1.26 in 2.17 in N/A N/A 0.38 in 0.87 in Steel N/A 1.69 in 1.89 in (48 mm) N/A 29747 Knob Guide
M-29749 CAD Icon (for items table) Blank Flange - Size 3 Fiber-Reinforced Plastic 0.43 in 1.02 in 1.65 in 2.76 in N/A N/A 0.50 in 1.06 in Steel N/A 2.05 in 2.28 in (57.9 mm) N/A 29749 Knob Guide
M-29750 CAD Icon (for items table) Flange Only - Calibrated Fiber-Reinforced Plastic 0.27 in N/A N/A 1.77 in N/A N/A N/A N/A N/A N/A N/A 1.46 in (37.1 mm) N/A 29750 Knob Guide
M-29752 CAD Icon (for items table) Flange Only - Calibrated Fiber-Reinforced Plastic 0.31 in N/A N/A 2.17 in N/A N/A N/A N/A N/A N/A N/A 1.89 in (48 mm) N/A 29752 Knob Guide
M-29754 CAD Icon (for items table) Flange Only - Calibrated Fiber-Reinforced Plastic 0.43 in N/A N/A 2.76 in N/A N/A N/A N/A N/A N/A N/A 2.28 in (57.9 mm) N/A 29754 Knob Guide
M-29755 CAD Icon (for items table) Flange Only - Blank Fiber-Reinforced Plastic 0.27 in N/A N/A 1.77 in N/A N/A N/A N/A N/A N/A N/A 1.46 in (37.1 mm) N/A 29755 Knob Guide
M-29757 CAD Icon (for items table) Flange Only - Blank Fiber-Reinforced Plastic 0.31 in N/A N/A 2.17 in N/A N/A N/A N/A N/A N/A N/A 1.89 in (48 mm) N/A 29757 Knob Guide
M-29759 CAD Icon (for items table) Flange Only - Blank Fiber-Reinforced Plastic 0.43 in N/A N/A 2.76 in N/A N/A N/A N/A N/A N/A N/A 2.28 in (57.9 mm) N/A 29759 Knob Guide
  Results 1 - 15 of 15 1 
Monroe Engineering