Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground - Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    On request:
    Special versions.

    (Kipp Original Design)
  • 1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    N/A
    77443
    N/A Stainless Steel N/A G N/A 32.00 mm N/A 3.00 mm N/A 3.50 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A M6 X 0.75 mm N/A 0.80 mm N/A
    N/A
    77444
    N/A Stainless Steel N/A G N/A 39.00 mm N/A 4.00 mm N/A 4.00 mm N/A 18.00 mm N/A 14.00 mm N/A 21.00 mm N/A M8 X 1.00 mm N/A 1.30 mm N/A
    N/A
    77445
    N/A Stainless Steel N/A G N/A 44.00 mm N/A 5.00 mm N/A 5.00 mm N/A 21.00 mm N/A 15.00 mm N/A 24.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A
    N/A
    77446
    N/A Stainless Steel N/A G N/A 52.00 mm N/A 6.00 mm N/A 6.00 mm N/A 25.00 mm N/A 18.00 mm N/A 28.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A
    N/A
    77447
    N/A Stainless Steel N/A G N/A 68.00 mm N/A 8.00 mm N/A 8.00 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A
    N/A
    77448
    N/A Stainless Steel N/A G N/A 74.00 mm N/A 10.00 mm N/A 10 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A
    N/A
    77449
    N/A Stainless Steel N/A G N/A 78.00 mm N/A 12.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A
    N/A
    77450
    N/A Stainless Steel N/A G N/A 96.00 mm N/A 16.00 mm N/A 16 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A M24 X 2.00 mm N/A 3.20 mm N/A
    N/A
    77451
    N/A Stainless Steel N/A H N/A 32.00 mm N/A 3.00 mm N/A 3.50 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A M6 X 0.75 mm N/A 0.80 mm N/A 10 mm
    N/A
    77452
    N/A Stainless Steel N/A H N/A 39.00 mm N/A 4.00 mm N/A 4.00 mm N/A 18.00 mm N/A 14.00 mm N/A 21.00 mm N/A M8 X 1.00 mm N/A 1.30 mm N/A 13 mm
    N/A
    77453
    N/A Stainless Steel N/A H N/A 44.00 mm N/A 5.00 mm N/A 5.00 mm N/A 21.00 mm N/A 15.00 mm N/A 24.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A 17 mm
    N/A
    77454
    N/A Stainless Steel N/A H N/A 52.00 mm N/A 6.00 mm N/A 6.00 mm N/A 25.00 mm N/A 18.00 mm N/A 28.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A 19 mm
    N/A
    77455
    N/A Stainless Steel N/A H N/A 68.00 mm N/A 8.00 mm N/A 8.00 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A 24 mm
    N/A
    77456
    N/A Stainless Steel N/A H N/A 74.00 mm N/A 10.00 mm N/A 10 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 30 mm
    N/A
    77457
    N/A Stainless Steel N/A H N/A 78.00 mm N/A 12.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 30 mm
    N/A
    77458
    N/A Stainless Steel N/A H N/A 96.00 mm N/A 16.00 mm N/A 16 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A M24 X 2.00 mm N/A 3.20 mm N/A 36 mm
    1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1