Adjustable Handles CastersCrank Handles FastenersFine Adjusters Handles Handwheels Hinges Hoist Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding Gaga codePh: 877-740-2007
Fax: 800-453-9683

Hours of Operation:
8am - 6pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

General Terms & Conditions of Sale of Goods

General Supplier
Terms & Conditions 
Search Catalog
        
 All Categories    Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric
All Categories > Kipp Products > Kipp - Pins > Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric

 
Check up to five results to perform an action.


Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground - Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    On request:
    Special versions.

    (Kipp Original Design)

    		•


    		   
      Results 1 - 16 of 16 Unit of Measure: Imperial Metric Both 1 

    Item #

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    M65653 Steel G 31.50 mm 3.00 mm 3.50 mm 14.00 mm 11.00 mm 17.00 mm 1/4-28 in 0.80 mm N/A
    M65607 Steel G 43.00 mm 4.00 mm 4.00 mm 18.00 mm 18.00 mm 21.00 mm 5/16-24 in 1.00 mm N/A
    M65611 Steel G 50.00 mm 5.00 mm 5.00 mm 21.00 mm 21.00 mm 24.00 mm 3/8-24 in 1.30 mm N/A
    M65629 Steel G 59.00 mm 6.00 mm 6.00 mm 25.00 mm 25.00 mm 28.00 mm 1/2-13 in 1.80 mm N/A
    M65645 Steel G 77.00 mm 8.00 mm 8.00 mm 33.00 mm 33.00 mm 36.00 mm 5/8-11 in 2.30 mm N/A
    M65647 Steel G 83.00 mm 10.00 mm 10 mm 33.00 mm 33.00 mm 40.00 mm 3/4-10 in 2.60 mm N/A
    M65649 Steel G 87.00 mm 12.00 mm 12 mm 33.00 mm 33.00 mm 42.00 mm 3/4-16 in 2.80 mm N/A
    M65651 Steel G 106.00 mm 16.00 mm 16 mm 40.00 mm 40.00 mm 50.00 mm 1-8 in 3.20 mm N/A
    M65765 Steel H 31.50 mm 3.00 mm 3.50 mm 14.00 mm 11.00 mm 17.00 mm 1/4-28 in 0.80 mm 7/16 in
    M65655 Steel H 43.00 mm 4.00 mm 4.00 mm 18.00 mm 18.00 mm 21.00 mm 5/16-24 in 1.00 mm 1/2 in
    M65691 Steel H 50.00 mm 5.00 mm 5.00 mm 21.00 mm 21.00 mm 24.00 mm 3/8-24 in 1.30 mm 9/16 in
    M65741 Steel H 59.00 mm 6.00 mm 6.00 mm 25.00 mm 25.00 mm 28.00 mm 1/2-13 in 1.80 mm 3/4 in
    M65757 Steel H 77.00 mm 8.00 mm 8.00 mm 33.00 mm 33.00 mm 36.00 mm 5/8-11 in 2.30 mm 15/16 in
    M65759 Steel H 83.00 mm 10.00 mm 10 mm 33.00 mm 33.00 mm 40.00 mm 3/4-10 in 2.60 mm 1-1/8 in
    M65761 Steel H 87.00 mm 12.00 mm 12 mm 33.00 mm 33.00 mm 42.00 mm 3/4-16 in 2.80 mm 1-1/8 in
    M65763 Steel H 106.00 mm 16.00 mm 16 mm 40.00 mm 40.00 mm 50.00 mm 1-8 in 3.20 mm 1-1/2 in
      Results 1 - 16 of 16 1 
    Monroe Engineering