Adjustable Handles CastersCrank Handles FastenersFine Adjusters Handles Handwheels Hinges Hoist Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding Gaga codePh: 877-740-2007
Fax: 800-453-9683

Hours of Operation:
8am - 6pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

General Terms & Conditions of Sale of Goods

General Supplier
Terms & Conditions 
Search Catalog
        
 All Categories    Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric
All Categories > Kipp Products > Kipp - Pins > Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric

 
Check up to five results to perform an action.


Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    (Kipp Original Design)

    		•


    		   
      Results 1 - 16 of 16 Unit of Measure: Imperial Metric Both 1 

    Item #

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    M65709 Stainless Steel G 33.00 mm 3.00 mm 5.00 mm 14.00 mm 11.00 mm 17.00 mm 1/4-28 in 0.80 mm N/A
    M65693 Stainless Steel G 40.50 mm 4.00 mm 6.00 mm 18.00 mm 13.50 mm 21.00 mm 5/16-24 in 1.00 mm N/A
    M65697 Stainless Steel G 46.50 mm 5.00 mm 8.00 mm 21.00 mm 14.50 mm 24.00 mm 3/8-24 in 1.30 mm N/A
    M65699 Stainless Steel G 54.70 mm 6.00 mm 9 mm 25.00 mm 17.70 mm 28.00 mm 1/2-13 in 1.80 mm N/A
    M65701 Stainless Steel G 72.00 mm 8.00 mm 12 mm 33.00 mm 24.00 mm 36.00 mm 5/8-11 in 2.30 mm N/A
    M65703 Stainless Steel G 79.00 mm 10.00 mm 15 mm 33.00 mm 24.00 mm 40.00 mm 3/4-10 in 2.80 mm N/A
    M65705 Stainless Steel G 84.00 mm 12.00 mm 18 mm 33.00 mm 24.00 mm 42.00 mm 3/4-16 in 2.80 mm N/A
    M65707 Stainless Steel G 104.00 mm 16.00 mm 24.00 mm 40.00 mm 30.00 mm 50.00 mm 1-8 in 3.20 mm N/A
    M65727 Stainless Steel H 33.00 mm 3.00 mm 5.00 mm 14.00 mm 11.00 mm 17.00 mm 1/4-28 in 0.80 mm 7/16 in
    M65711 Stainless Steel H 40.50 mm 4.00 mm 6.00 mm 18.00 mm 13.50 mm 21.00 mm 5/16-24 in 1.00 mm 1/2 in
    M65715 Stainless Steel H 46.50 mm 5.00 mm 8.00 mm 21.00 mm 14.50 mm 24.00 mm 3/8-24 in 1.30 mm 9/16 in
    M65717 Stainless Steel H 54.70 mm 6.00 mm 9 mm 25.00 mm 17.70 mm 28.00 mm 1/2-13 in 1.80 mm 3/4 in
    M65719 Stainless Steel H 72.00 mm 8.00 mm 12 mm 33.00 mm 24.00 mm 36.00 mm 5/8-11 in 2.30 mm 15/16 in
    M65721 Stainless Steel H 79.00 mm 10.00 mm 15 mm 33.00 mm 24.00 mm 40.00 mm 3/4-10 in 2.80 mm 1 1/8 in
    M65723 Stainless Steel H 84.00 mm 12.00 mm 18 mm 33.00 mm 24.00 mm 42.00 mm 3/4-16 in 2.80 mm 1 1/8 in
    M65725 Stainless Steel H 104.00 mm 16.00 mm 24.00 mm 40.00 mm 30.00 mm 50.00 mm 1-8 in 3.20 mm 1 1/2 in
      Results 1 - 16 of 16 1 
    Monroe Engineering