Indexing Plunger W/Pull Ring - Locking Pin Hardened - Stainless Steel - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin hardened:
natural finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Key ring 1.4310, natural finish
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.
On request:
Special versions and spacer rings.
Item # |
IntegrationID |
Material |
Style |
D |
H |
D4 |
L2 |
L1 |
D1 |
F x 30° |
L4 |
SW1 |
SW2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
M65480 |
IntegrationID
N/A 78052 |
Material N/A Stainless Steel | Style N/A R | D N/A 4.00 mm | H N/A 4.00 mm | D4 N/A 15.00 mm | L2 N/A 6.00 mm | L1 N/A 15.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.00 mm | L4 N/A 13.00 mm | SW1 N/A 10.00 mm | SW2 N/A |
M65481 |
IntegrationID
N/A 78053 |
Material N/A Stainless Steel | Style N/A R | D N/A 5.00 mm | H N/A 5.00 mm | D4 N/A 23.00 mm | L2 N/A 7.00 mm | L1 N/A 17.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | L4 N/A 15.00 mm | SW1 N/A 13.00 mm | SW2 N/A |
M65482 |
IntegrationID
N/A 78054 |
Material N/A Stainless Steel | Style N/A R | D N/A 6.00 mm | H N/A 6.00 mm | D4 N/A 23.00 mm | L2 N/A 8.00 mm | L1 N/A 20.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | L4 N/A 17.00 mm | SW1 N/A 14.00 mm | SW2 N/A |
M65483 |
IntegrationID
N/A 78055 |
Material N/A Stainless Steel | Style N/A R | D N/A 8.00 mm | H N/A 8.00 mm | D4 N/A 28.00 mm | L2 N/A 10.00 mm | L1 N/A 26.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | L4 N/A 23.00 mm | SW1 N/A 19.00 mm | SW2 N/A |
M65484 |
IntegrationID
N/A 78056 |
Material N/A Stainless Steel | Style N/A R | D N/A 10.00 mm | H N/A 10 mm | D4 N/A 28.00 mm | L2 N/A 12.00 mm | L1 N/A 28.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | L4 N/A 25.00 mm | SW1 N/A 22.00 mm | SW2 N/A |
M65485 |
IntegrationID
N/A 78057 |
Material N/A Stainless Steel | Style N/A S | D N/A 4.00 mm | H N/A 4.00 mm | D4 N/A 15.00 mm | L2 N/A 6.00 mm | L1 N/A 15.00 mm | D1 N/A M8 X 1.00 mm | F x 30° N/A 1.00 mm | L4 N/A 13.00 mm | SW1 N/A 10.00 mm | SW2 N/A 13.00 mm |
M65486 |
IntegrationID
N/A 78058 |
Material N/A Stainless Steel | Style N/A S | D N/A 5.00 mm | H N/A 5.00 mm | D4 N/A 23.00 mm | L2 N/A 7.00 mm | L1 N/A 17.00 mm | D1 N/A M10 X 1.00 mm | F x 30° N/A 1.30 mm | L4 N/A 15.00 mm | SW1 N/A 13.00 mm | SW2 N/A 17.00 mm |
M65487 |
IntegrationID
N/A 78059 |
Material N/A Stainless Steel | Style N/A S | D N/A 6.00 mm | H N/A 6.00 mm | D4 N/A 23.00 mm | L2 N/A 8.00 mm | L1 N/A 20.00 mm | D1 N/A M12 X 1.50 mm | F x 30° N/A 1.80 mm | L4 N/A 17.00 mm | SW1 N/A 14.00 mm | SW2 N/A 19.00 mm |
M65488 |
IntegrationID
N/A 78060 |
Material N/A Stainless Steel | Style N/A S | D N/A 8.00 mm | H N/A 8.00 mm | D4 N/A 28.00 mm | L2 N/A 10.00 mm | L1 N/A 26.00 mm | D1 N/A M16 X 1.50 mm | F x 30° N/A 2.30 mm | L4 N/A 23.00 mm | SW1 N/A 19.00 mm | SW2 N/A 24.00 mm |
M65489 |
IntegrationID
N/A 78061 |
Material N/A Stainless Steel | Style N/A S | D N/A 10.00 mm | H N/A 10 mm | D4 N/A 28.00 mm | L2 N/A 12.00 mm | L1 N/A 28.00 mm | D1 N/A M20 X 1.50 mm | F x 30° N/A 2.80 mm | L4 N/A 25.00 mm | SW1 N/A 22.00 mm | SW2 N/A 30.00 mm |