Material:
-Steel quality class 5.8

Surface finish:
-Blue chromated

Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.

On request:
Special versions.

(Kipp Original Design)
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

Finish

L

A

D

H

D2

L2

L3

L1

D1

F x 30°

SW1

N/A
78161
N/A Steel Blue Chromate N/A 41.50 in N/A 16.00 in N/A 4.00 in N/A 10.00 in N/A 2.30 in N/A 12.00 in N/A 17.00 in N/A 20.00 in N/A M6 mm N/A 0.70 in N/A 6.00 in
N/A
78162
N/A Steel Blue Chromate N/A 54.00 in N/A 19.00 in N/A 5.00 in N/A 12.00 in N/A 3.00 in N/A 15.00 in N/A 24.00 in N/A 27.00 in N/A M8 mm N/A 0.90 in N/A 8.00 in
N/A
78163
N/A Steel Blue Chromate N/A 65.00 in N/A 23.00 in N/A 6.00 in N/A 14.00 in N/A 3.50 in N/A 18.00 in N/A 30.00 in N/A 34.00 in N/A M10 mm N/A 1.10 in N/A 10.00 in
N/A
78164
N/A Steel Blue Chromate N/A 73.00 in N/A 31.00 in N/A 8.00 in N/A 19.00 in N/A 4.70 in N/A 22.00 in N/A 28.00 in N/A 32.00 in N/A M12 mm N/A 1.30 in N/A 12.00 in
N/A
78165
N/A Steel Blue Chromate N/A 103.00 in N/A 33.00 in N/A 10.00 in N/A 25.00 in N/A 4.70 in N/A 27.00 in N/A 45.00 in N/A 51.00 in N/A M16 mm N/A 1.60 in N/A 16.00 in
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1