Adjustable Handles CastersCrank Handles FastenersFine Adjusters Handles Handwheels Hinges Hoist Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding Gaga codePh: 877-740-2007
Fax: 800-453-9683

Hours of Operation:
8am - 6pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

General Terms & Conditions of Sale of Goods

General Supplier
Terms & Conditions 
Search Catalog
        
 All Categories    Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardened - Steel - Metric
All Categories > Kipp Products > Kipp - Pins > Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardened - Steel - Metric > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardened - Steel - Metric

 
Check up to five results to perform an action.

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    (Kipp Original Design)



    		•    
      Results 1 - 16 of 16 Unit of Measure: Imperial Metric Both 1 

    Item #

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    M65736 Steel G 33.00 mm 3.00 mm 5.00 mm 14.00 mm 11.00 mm 17.00 mm M6 X 0.75 mm 0.80 mm N/A
    M65688 Steel G 41.00 mm 4.00 mm 6.00 mm 18.00 mm 14.00 mm 21.00 mm M8 X 1.00 mm 1.00 mm N/A
    M65694 Steel G 47.00 mm 5.00 mm 8.00 mm 21.00 mm 15.00 mm 24.00 mm M10 X 1.00 mm 1.30 mm N/A
    M65712 Steel G 55.00 mm 6.00 mm 9 mm 25.00 mm 18.00 mm 28.00 mm M12 X 1.50 mm 1.80 mm N/A
    M65728 Steel G 72.00 mm 8.00 mm 12 mm 33.00 mm 24.00 mm 36.00 mm M16 X 1.50 mm 2.30 mm N/A
    M65730 Steel G 79.00 mm 10.00 mm 15 mm 33.00 mm 24.00 mm 40.00 mm M20 X 1.50 mm 2.80 mm N/A
    M65732 Steel G 84.00 mm 12.00 mm 18 mm 33.00 mm 24.00 mm 42.00 mm M20 X 1.50 mm 2.80 mm N/A
    M65734 Steel G 104.00 mm 16.00 mm 24.00 mm 40.00 mm 30.00 mm 50.00 mm M24 X 2.00 mm 3.20 mm N/A
    M65754 Steel H 33.00 mm 3.00 mm 5.00 mm 14.00 mm 11.00 mm 17.00 mm M6 X 0.75 mm 0.80 mm 10 mm
    M65738 Steel H 41.00 mm 4.00 mm 6.00 mm 18.00 mm 14.00 mm 21.00 mm M8 X 1.00 mm 1.00 mm 13 mm
    M65742 Steel H 47.00 mm 5.00 mm 8.00 mm 21.00 mm 15.00 mm 24.00 mm M10 X 1.00 mm 1.30 mm 17 mm
    M65744 Steel H 55.00 mm 6.00 mm 9 mm 25.00 mm 18.00 mm 28.00 mm M12 X 1.50 mm 1.80 mm 19 mm
    M65746 Steel H 72.00 mm 8.00 mm 12 mm 33.00 mm 24.00 mm 36.00 mm M16 X 1.50 mm 2.30 mm 24 mm
    M65748 Steel H 79.00 mm 10.00 mm 15 mm 33.00 mm 24.00 mm 40.00 mm M20 X 1.50 mm 2.80 mm 30 mm
    M65750 Steel H 84.00 mm 12.00 mm 18 mm 33.00 mm 24.00 mm 42.00 mm M20 X 1.50 mm 2.80 mm 30 mm
    M65752 Steel H 104.00 mm 16.00 mm 24.00 mm 40.00 mm 30.00 mm 50.00 mm M24 X 2.00 mm 3.20 mm 36 mm
      Results 1 - 16 of 16 1 
    Monroe Engineering