Wave spring washers provide medium loads in a small axial space. This series is split, in other words there is a small gap in the wave circumference. This gap or split allows the ends to move during compression, which if constrained in a bore prevents binding. Common applications for this type of parts is adjacent to ball bearings, where shaft take up or thermal expansion & contraction accommodation is required. The gap or split is advantageous for such applications where the bore is made of softer material than the spring.
Unit of Measure
Weight |
N/A 0.015083 Pound |
Material |
N/A High Carbon, C 1060-1075 / SWRH72A |
Height |
N/A 3.625 Inch |
Depth |
N/A 0.240 Inch |
Width |
N/A 0.240 Inch |
Application & Uses |
N/A Fastening, Pushbutton, Slip Clutch, etc. |
Features/Advantages/Benefits |
N/A Enables the spring height to be reduced by as much as 50%, fits in tighter axial and radial locations, expands as compression takes place and thus maintains the bore size |
Country of Origin |
N/A - |
Minimum ID (In.) |
N/A 3.120 Inch |
Maximum OD (In.) |
N/A 3.625 Inch |
Thickness (In.) |
N/A 0.030 Inch |
Free Height (Approx) (In.) |
N/A 0.240 Inch |
Loaded Height (In.) |
N/A 0.109 Inch |
# of Waves |
N/A 4 |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
