• Made from impact resistant polypropylene (PP) these knobs feature a smooth, comfortable gripping surface that gives off a "soft" feel with no sharp edges
  • Insert material is brass on all tapped or reamed versions. All reamed versions are provided with the set screw hole and set screw installed.
  • Insert is molded in with a slight shoulder effect so all the torque is absorbed by the insert and not the plastic
  • Removable center cap is available in colors. Ask sales for a complete listing of available colors
  • Blind Hole
  • 1 - 15 of 15 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    L

    D

    l

    d

    Diameter

    Stud Length

    N/A
    82795
    N/A 3.50 mm N/A 16.00 mm N/A 10.00 mm N/A M4 mm N/A N/A
    N/A
    82796
    N/A 3.50 mm N/A 16.00 mm N/A 16.00 mm N/A M4 mm N/A N/A
    N/A
    82797
    N/A 4.00 mm N/A 20.00 mm N/A 10.00 mm N/A M5 mm N/A N/A
    N/A
    82798
    N/A 4.00 mm N/A 20.00 mm N/A 16.00 mm N/A M5 mm N/A N/A
    N/A
    82799
    N/A 4.00 mm N/A 20.00 mm N/A 25.00 mm N/A M5 mm N/A N/A
    N/A
    82800
    N/A 5.00 mm N/A 24.00 mm N/A 12.00 mm N/A M6 mm N/A N/A
    N/A
    82801
    N/A 5.00 mm N/A 24.00 mm N/A 16.00 mm N/A M6 mm N/A N/A
    N/A
    82802
    N/A 5.00 mm N/A 24.00 mm N/A 25.00 mm N/A M6 mm N/A N/A
    N/A
    82803
    N/A 5.00 mm N/A 24.00 mm N/A 40.00 mm N/A M6 mm N/A N/A
    N/A
    82804
    N/A 6.00 mm N/A 30.00 mm N/A 16.00 mm N/A M8 mm N/A N/A
    N/A
    82805
    N/A 6.00 mm N/A 30.00 mm N/A 25.00 mm N/A M8 mm N/A N/A
    N/A
    82806
    N/A 6.00 mm N/A 30.00 mm N/A 40.00 mm N/A M8 mm N/A N/A
    N/A
    82807
    N/A 8.00 mm N/A 36.00 mm N/A 20.00 mm N/A M10 mm N/A N/A
    N/A
    82808
    N/A 8.00 mm N/A 36.00 mm N/A 30.00 mm N/A M10 mm N/A N/A
    N/A
    82809
    N/A 8.00 mm N/A 36.00 mm N/A 40.00 mm N/A M10 mm N/A N/A
    1 - 15 of 15 | Results Per Page | View | Unit of Measure
    1