• Alnico Magnet Assemblies - Island 2 Pole

Alnico Island 2-Pole magnet housed in a steel cup. Especially effective in mold applications. Can not be press fit without additional insulation. Use bottom tapped hole for mounting purposes. +/- .005" diameter & +/- .015" length. Maximum temperature is 800 Fahrenheit (427C). Holding forces stated are shown at 50% of the actual tested value.

Did you want to learn more about Magnets? Give us a call or take a look at our magnet guides.

1 - 13 of 13 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

IntegrationID

Diameter

Overall Length

Tap Thread

Tap Depth

Holding Value (Flat Items)

N/A
1808 		N/A 0.38 in N/A 0.50 in N/A 8-32 N/A 0.09 in N/A 0.72 lb
N/A
1809 		N/A 0.50 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 1.13 lb
N/A
1810 		N/A 0.50 in N/A 0.75 in N/A 10-32 N/A 0.19 in N/A 1.54 lb
N/A
1811 		N/A 0.50 in N/A 1.00 in N/A 10-32 N/A 0.25 in N/A 1.75 lb
N/A
1812 		N/A 0.63 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 1.19 lb
N/A
1815 		N/A 0.75 in N/A 0.50 in N/A 10-32 N/A 0.16 in N/A 2.69 lb
N/A
1816 		N/A 0.75 in N/A 0.75 in N/A 10-32 N/A 0.25 in N/A 4.56 lb
N/A
1817 		N/A 0.75 in N/A 1.00 in N/A 10-32 N/A 0.25 in N/A 4.69 lb
N/A
1818 		N/A 0.75 in N/A 1.25 in N/A 10-32 N/A 0.25 in N/A 4.81 lb
N/A
1819 		N/A 1 in N/A 0.50 in N/A 1/4-20 N/A 0.16 in N/A 4.00 lb
N/A
1820 		N/A 1 in N/A 0.75 in N/A 1/4-20 N/A 0.25 in N/A 5.50 lb
N/A
1821 		N/A 1 in N/A 1.00 in N/A 1/4-20 N/A 0.28 in N/A 7.25 lb
N/A
1823 		N/A 1.25 in N/A 1.25 in N/A 1/4-20 N/A 0.28 in N/A 12.5 lb
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1