Material:
Plate steel, damper plate PUR elastomere (Sylomer V12)

Surface finish:
Plate blue chromated; damper plate gray, fixed, cannot slip. Range of use from -30 °C to +70 °C

Note:
The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Locating Foot.

(Kipp Original Design)
Unit of Measure

D

N/A 36.00 mm

H

N/A 15 mm

D2

N/A 5.50 mm

D1

N/A 31.00 mm

Load capacity (under pressure of 0.4 N/mm²)

N/A 212 N

H1 (under pressure of 0 / 0.4 / 0.6 N/mm²)

N/A 4 / 2.8 / 1.9 mm

Country of Origin

N/A -

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.