Double Acting Pins are activated by pull or push motion and are ideal for quick removal and insertion. When the handle is pushed, the locking balls release and and the pin can be placed in one, easy motion. Similarly, pulling on the handle releases the locking balls and the pin can be removed swiftly. The stainless steel build gives corrosion resistance for increased durability. All of our Double Acting Pins meet or exceed NASM 23460 and MS17989 design specifications. Monroe offers an optional drive out feature, for removing pins under slight shear load, where the center spindle of the pin extends beyond the shank end. Additionally, four ball options are available upon request.
Unit of Measure
Material |
N/A 17-4 Stainless |
A - Pin Diameter |
N/A 0.188 in |
L |
N/A 0.780 in |
P |
N/A 1.300 in |
H |
N/A 1.030 in |
J |
N/A 0.080 in |
M |
N/A 0.109 in |
N |
N/A 1.50 in |
G - Handle Length |
N/A 1.945 in |
Grip Length |
N/A 5.00 in |
Material (Pin) |
N/A 17-4 Stainless |
K (Min) |
N/A 0.415 in |
B - Ball Grip Diameter (+/- .005) |
N/A 0.220 in |
C - Lead Length (Max) |
N/A 0.410 in |
E (Min) - Handle Diameter |
N/A 0.360 in |
E (Max) - Handle Diameter |
N/A 0.450 in |
F (Min) - Handle Width |
N/A 1.000 in |
F (Max) - Handle Width |
N/A 1.125 in |
K (Max) |
N/A 0.480 in |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |
Pin Diameter A (Min-Max) |
N/A 0.187 min0.188 max |
