Grip Knob - Tapped Blind Hole - Inch
Fluted Grip Knobs
Plastic grip knobs are designed to provide a positive, non-slip grip, these knobs are ideal where a firm fastening action is required. Gripping surface is available in 3 versions; “ribbed”, “knurled”, or “fluted”. Gripping surface is comfortable and free of any sharp, uncomfortable edges. A large selection of insert or stud materials are available including, but not limited to: steel, brass, stainless steel, and zinc plated.
-
Features
- High strength polypropylene (PP) with smooth channel fluting
- provides a comfortable, sold gripping surface for fingers
- Resistant to solvents, chemicals and cutting fluids
- Brass insert protrudes beyond flush to give a shouldering effect
- ELESA Original Design
Item # |
CAD |
IntegrationID |
Material |
d2 |
d - Thread |
L-Total Height |
d1 - Hub Diameter |
l2 - Hub Projection |
h |
Handle Type |
Protrusion |
Diameter |
Alternate P/N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 29160 |
CAD
N/A 
|
IntegrationID
N/A 7990 |
Material N/A Polypropylene | d2 N/A 0.43 in | d - Thread N/A 8-32 | L-Total Height N/A 0.63 in | d1 - Hub Diameter N/A 0.47 in | l2 - Hub Projection N/A 0.24 in | h N/A 0.24 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 0.79 in (20 mm) | Alternate P/N N/A |
| M-29161 |
CAD
N/A
|
IntegrationID
N/A 7991 |
Material N/A Polypropylene | d2 N/A 0.43 in | d - Thread N/A 10-32 | L-Total Height N/A 0.63 in | d1 - Hub Diameter N/A 0.47 in | l2 - Hub Projection N/A 0.24 in | h N/A 0.24 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 0.79 in (20 mm) | Alternate P/N N/A 29161 |
| M-29162 |
CAD
N/A
|
IntegrationID
N/A 7992 |
Material N/A Polypropylene | d2 N/A 0.59 in | d - Thread N/A 10-32 | L-Total Height N/A 0.75 in | d1 - Hub Diameter N/A 0.63 in | l2 - Hub Projection N/A 0.31 in | h N/A 0.39 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 1.00 in (25.4 mm) | Alternate P/N N/A 29162 |
| M-29163 |
CAD
N/A
|
IntegrationID
N/A 7993 |
Material N/A Polypropylene | d2 N/A 0.59 in | d - Thread N/A 1/4-20 | L-Total Height N/A 0.75 in | d1 - Hub Diameter N/A 0.63 in | l2 - Hub Projection N/A 0.31 in | h N/A 0.31 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 1.00 in (25.4 mm) | Alternate P/N N/A 29163 |
| 29164 |
CAD
N/A
|
IntegrationID
N/A 7994 |
Material N/A Polypropylene | d2 N/A 0.83 in | d - Thread N/A 1/4-20 | L-Total Height N/A 0.87 in | d1 - Hub Diameter N/A 0.67 in | l2 - Hub Projection N/A 0.35 in | h N/A 0.39 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 1.26 in (32 mm) | Alternate P/N N/A |
| 29165 |
CAD
N/A
|
IntegrationID
N/A 7995 |
Material N/A Polypropylene | d2 N/A 0.83 in | d - Thread N/A 5/16-18 | L-Total Height N/A 0.87 in | d1 - Hub Diameter N/A 0.67 in | l2 - Hub Projection N/A 0.35 in | h N/A 0.39 in | Handle Type N/A Round | Protrusion N/A 0.01 in | Diameter N/A 1.26 in (32 mm) | Alternate P/N N/A |
