L-Handle Indexing Plunger - Inch
Kipp - Pins
Features:
Note: Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
- Material:Steel quality class 5.8
- Surface finish:Blue chromated
On request: Special versions.
(Kipp Original Design)
Unit of Measure
Items |
M65440 L-Handle Indexing Plunger - Inch |
M65442 L-Handle Indexing Plunger - Inch |
M65444 L-Handle Indexing Plunger - Inch |
M65446 L-Handle Indexing Plunger - Inch |
||||
Finish | N/A Steel Blue Chromate | |||||||
L | N/A 1.63 in | N/A 2.56 in | N/A 2.87 in | N/A 4.05 in | ||||
A | N/A 0.61 in | N/A 0.92 in | N/A 1.23 in | N/A 1.29 in | ||||
D | N/A 0.16 in | N/A 0.25 in | N/A 0.31 in | N/A 0.38 in | ||||
H | N/A 0.37 in | N/A 0.56 in | N/A 0.75 in | N/A 1 in | ||||
D2 | N/A 0.09 in | N/A 0.14 in | N/A 0.19 in | N/A 0.19 in | ||||
L2 | N/A 0.47 in | N/A 0.69 in | N/A 0.87 in | N/A 1.06 in | ||||
L3 | N/A 0.63 in | N/A 1.06 in | N/A 1.13 in | N/A 1.75 in | ||||
L1 | N/A 0.79 in | N/A 1.31 in | N/A 1.25 in | N/A 1.99 in | ||||
D1 | N/A 1/4-20 in | N/A 3/8-16 in | N/A 1/2-13 in | N/A 5/8-11 in | ||||
F x 30° | N/A 0.70 in | N/A 1.10 in | N/A 1.30 in | N/A 1.60 in | ||||
F1 - Spring Force Initial Pressure | N/A 3 N | N/A 4 N | N/A 4 N | N/A 4 N | ||||
F2 - Spring Force Final Pressure | N/A 10 N | N/A 16 N | N/A 22 N | N/A 23 N | ||||
SW1 | N/A 0.25 in | N/A 0.38 in | N/A 0.50 in | N/A 0.63 in | ||||
Tightening Torque Max. | N/A 1.6 nm | N/A 10 nm | N/A 13 nm | N/A 42 nm | ||||
|