Features:
Note: Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
- Material:Steel quality class 5.8
- Surface finish:Blue chromated
On request: Special versions.
(Kipp Original Design)
Unit of Measure
Finish |
N/A Steel Blue Chromate |
L |
N/A 1.63 in |
A |
N/A 0.61 in |
D |
N/A 0.16 in |
H |
N/A 0.37 in |
D2 |
N/A 0.09 in |
L2 |
N/A 0.47 in |
L3 |
N/A 0.63 in |
L1 |
N/A 0.79 in |
D1 |
N/A 1/4-20 in |
F x 30° |
N/A 0.70 in |
F1 - Spring Force Initial Pressure |
N/A 3 N |
F2 - Spring Force Final Pressure |
N/A 10 N |
SW1 |
N/A 0.25 in |
Tightening Torque Max. |
N/A 1.6 nm |
Country of Origin |
N/A - |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product Guides |
N/A Plungers & Pin's Guides |