• Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric
  • Indexing Plunger - No Collar - Locking Bolt Hardened - Steel - Metric

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground - Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the Indexing Plungers, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    On request:
    Special versions.

    (Kipp Original Design)
    • 1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1 
    Request Information Compare Items
    Clear Filter

    Item #

    IntegrationID

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    N/A
    77363         		N/A Steel N/A G N/A 31.50 mm N/A 3.00 mm N/A 3.50 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A 1/4-28 in N/A 0.80 mm N/A
    N/A
    77364         		N/A Steel N/A G N/A 43.00 mm N/A 4.00 mm N/A 4.00 mm N/A 18.00 mm N/A 18.00 mm N/A 21.00 mm N/A 5/16-24 in N/A 1.00 mm N/A
    N/A
    77365         		N/A Steel N/A G N/A 50.00 mm N/A 5.00 mm N/A 5.00 mm N/A 21.00 mm N/A 21.00 mm N/A 24.00 mm N/A 3/8-24 in N/A 1.30 mm N/A
    N/A
    77366         		N/A Steel N/A G N/A 59.00 mm N/A 6.00 mm N/A 6.00 mm N/A 25.00 mm N/A 25.00 mm N/A 28.00 mm N/A 1/2-13 in N/A 1.80 mm N/A
    N/A
    77367         		N/A Steel N/A G N/A 77.00 mm N/A 8.00 mm N/A 8.00 mm N/A 33.00 mm N/A 33.00 mm N/A 36.00 mm N/A 5/8-11 in N/A 2.30 mm N/A
    N/A
    77368         		N/A Steel N/A G N/A 83.00 mm N/A 10.00 mm N/A 10 mm N/A 33.00 mm N/A 33.00 mm N/A 40.00 mm N/A 3/4-10 in N/A 2.60 mm N/A
    N/A
    77369         		N/A Steel N/A G N/A 87.00 mm N/A 12.00 mm N/A 12 mm N/A 33.00 mm N/A 33.00 mm N/A 42.00 mm N/A 3/4-16 in N/A 2.80 mm N/A
    N/A
    77370         		N/A Steel N/A G N/A 106.00 mm N/A 16.00 mm N/A 16 mm N/A 40.00 mm N/A 40.00 mm N/A 50.00 mm N/A 1-8 in N/A 3.20 mm N/A
    N/A
    77371         		N/A Steel N/A H N/A 31.50 mm N/A 3.00 mm N/A 3.50 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A 1/4-28 in N/A 0.80 mm N/A 7/16 in
    N/A
    77372         		N/A Steel N/A H N/A 43.00 mm N/A 4.00 mm N/A 4.00 mm N/A 18.00 mm N/A 18.00 mm N/A 21.00 mm N/A 5/16-24 in N/A 1.00 mm N/A 1/2 in
    N/A
    77373         		N/A Steel N/A H N/A 50.00 mm N/A 5.00 mm N/A 5.00 mm N/A 21.00 mm N/A 21.00 mm N/A 24.00 mm N/A 3/8-24 in N/A 1.30 mm N/A 9/16 in
    N/A
    77374         		N/A Steel N/A H N/A 59.00 mm N/A 6.00 mm N/A 6.00 mm N/A 25.00 mm N/A 25.00 mm N/A 28.00 mm N/A 1/2-13 in N/A 1.80 mm N/A 3/4 in
    N/A
    77375         		N/A Steel N/A H N/A 77.00 mm N/A 8.00 mm N/A 8.00 mm N/A 33.00 mm N/A 33.00 mm N/A 36.00 mm N/A 5/8-11 in N/A 2.30 mm N/A 15/16 in
    N/A
    77376         		N/A Steel N/A H N/A 83.00 mm N/A 10.00 mm N/A 10 mm N/A 33.00 mm N/A 33.00 mm N/A 40.00 mm N/A 3/4-10 in N/A 2.60 mm N/A 1-1/8 in
    N/A
    77377         		N/A Steel N/A H N/A 87.00 mm N/A 12.00 mm N/A 12 mm N/A 33.00 mm N/A 33.00 mm N/A 42.00 mm N/A 3/4-16 in N/A 2.80 mm N/A 1-1/8 in
    N/A
    77378         		N/A Steel N/A H N/A 106.00 mm N/A 16.00 mm N/A 16 mm N/A 40.00 mm N/A 40.00 mm N/A 50.00 mm N/A 1-8 in N/A 3.20 mm N/A 1-1/2 in
    1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1