Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

    (Kipp Original Design)
  • 1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    Material

    Style

    L

    D

    H

    D2

    L2

    L1

    D1

    F x 30°

    SW

    N/A
    77276
    N/A Stainless Steel N/A G N/A 33.00 mm N/A 3.00 mm N/A 5.00 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A 1/4-28 in N/A 0.80 mm N/A
    N/A
    77277
    N/A Stainless Steel N/A G N/A 40.50 mm N/A 4.00 mm N/A 6.00 mm N/A 18.00 mm N/A 13.50 mm N/A 21.00 mm N/A 5/16-24 in N/A 1.00 mm N/A
    N/A
    77278
    N/A Stainless Steel N/A G N/A 46.50 mm N/A 5.00 mm N/A 8.00 mm N/A 21.00 mm N/A 14.50 mm N/A 24.00 mm N/A 3/8-24 in N/A 1.30 mm N/A
    N/A
    77279
    N/A Stainless Steel N/A G N/A 54.70 mm N/A 6.00 mm N/A 9 mm N/A 25.00 mm N/A 17.70 mm N/A 28.00 mm N/A 1/2-13 in N/A 1.80 mm N/A
    N/A
    77280
    N/A Stainless Steel N/A G N/A 72.00 mm N/A 8.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A 5/8-11 in N/A 2.30 mm N/A
    N/A
    77281
    N/A Stainless Steel N/A G N/A 79.00 mm N/A 10.00 mm N/A 15 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A 3/4-10 in N/A 2.80 mm N/A
    N/A
    77282
    N/A Stainless Steel N/A G N/A 84.00 mm N/A 12.00 mm N/A 18 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A 3/4-16 in N/A 2.80 mm N/A
    N/A
    77283
    N/A Stainless Steel N/A G N/A 104.00 mm N/A 16.00 mm N/A 24.00 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A 1-8 in N/A 3.20 mm N/A
    N/A
    77284
    N/A Stainless Steel N/A H N/A 33.00 mm N/A 3.00 mm N/A 5.00 mm N/A 14.00 mm N/A 11.00 mm N/A 17.00 mm N/A 1/4-28 in N/A 0.80 mm N/A 7/16 in
    N/A
    77285
    N/A Stainless Steel N/A H N/A 40.50 mm N/A 4.00 mm N/A 6.00 mm N/A 18.00 mm N/A 13.50 mm N/A 21.00 mm N/A 5/16-24 in N/A 1.00 mm N/A 1/2 in
    N/A
    77286
    N/A Stainless Steel N/A H N/A 46.50 mm N/A 5.00 mm N/A 8.00 mm N/A 21.00 mm N/A 14.50 mm N/A 24.00 mm N/A 3/8-24 in N/A 1.30 mm N/A 9/16 in
    N/A
    77287
    N/A Stainless Steel N/A H N/A 54.70 mm N/A 6.00 mm N/A 9 mm N/A 25.00 mm N/A 17.70 mm N/A 28.00 mm N/A 1/2-13 in N/A 1.80 mm N/A 3/4 in
    N/A
    77288
    N/A Stainless Steel N/A H N/A 72.00 mm N/A 8.00 mm N/A 12 mm N/A 33.00 mm N/A 24.00 mm N/A 36.00 mm N/A 5/8-11 in N/A 2.30 mm N/A 15/16 in
    N/A
    77289
    N/A Stainless Steel N/A H N/A 79.00 mm N/A 10.00 mm N/A 15 mm N/A 33.00 mm N/A 24.00 mm N/A 40.00 mm N/A 3/4-10 in N/A 2.80 mm N/A 1 1/8 in
    N/A
    77290
    N/A Stainless Steel N/A H N/A 84.00 mm N/A 12.00 mm N/A 18 mm N/A 33.00 mm N/A 24.00 mm N/A 42.00 mm N/A 3/4-16 in N/A 2.80 mm N/A 1 1/8 in
    N/A
    77291
    N/A Stainless Steel N/A H N/A 104.00 mm N/A 16.00 mm N/A 24.00 mm N/A 40.00 mm N/A 30.00 mm N/A 50.00 mm N/A 1-8 in N/A 3.20 mm N/A 1 1/2 in
    1 - 16 of 16 | Results Per Page | View | Unit of Measure
    1