Material:

  • Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel
  • Stainless steel version: pressure foot and ball element in stainless steel
  • Surface finish:

  • Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish
  • Stainless steel version: natural finish
  • Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).

    Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.

    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    Material

    D2

    D3

    H2

    H1

    T

    D1

    SW

    H3 (under pressure of 0 / 0.4 / 0.6 N/mm²)

    Load capacity (under pressure of 0.4 N/mm²)

    Max Load

    Stud Length

    N/A
    78137
    N/A Steel N/A 32.00 mm N/A 30.50 mm N/A 5.00 mm N/A 22.00 mm N/A 10.00 mm N/A 3/8-16 in N/A 17 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78138
    N/A Steel N/A 40.00 mm N/A 30.50 mm N/A 6.00 mm N/A 26.00 mm N/A 12.00 mm N/A 1/2-13 in N/A 19 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78139
    N/A Steel N/A 50.00 mm N/A 40.50 mm N/A 7.0 mm N/A 32.00 mm N/A 14.00 mm N/A 5/8-11 in N/A 24 mm N/A 8 / 6.8 / 5.9 mm N/A 435 N N/A N/A
    N/A
    78140
    N/A Steel N/A 60.00 mm N/A 50.00 mm N/A 8.00 mm N/A 42.00 mm N/A 18.00 mm N/A 3/4-10 in N/A 30 mm N/A 8 / 6.8 / 5.9 mm N/A 705 N N/A N/A
    N/A
    78141
    N/A Stainless Steel N/A 32.00 mm N/A 30.50 mm N/A 5.00 mm N/A 22.00 mm N/A 10.00 mm N/A 3/8-16 in N/A 17 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78142
    N/A Stainless Steel N/A 40.00 mm N/A 30.50 mm N/A 6.00 mm N/A 26.00 mm N/A 12.00 mm N/A 1/2-13 in N/A 19 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78143
    N/A Stainless Steel N/A 50.00 mm N/A 40.50 mm N/A 7.0 mm N/A 32.00 mm N/A 14.00 mm N/A 5/8-11 in N/A 24 mm N/A 8 / 6.8 / 5.9 mm N/A 435 N N/A N/A
    N/A
    78144
    N/A Stainless Steel N/A 60.00 mm N/A 50.00 mm N/A 8.00 mm N/A 42.00 mm N/A 18.00 mm N/A 3/4-10 in N/A 30 mm N/A 8 / 6.8 / 5.9 mm N/A 705 N N/A N/A
    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1