Tooling Balls
Tooling Balls
Applications
Tungsten carbide balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flowmeters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet). They are also used for inspection tools, comparative checking and gaging.
Features
Tungsten carbide itself is practically inert; any attack is usually on the binder. Since other materials are less expensive, the selection of tungsten carbide solely for corrosion resistance is usually not justified. In severely corrosive conditions, carbides with more resistant binder formulation can be supplied.
Ballizing
Low-cost, high-speed hole sizing and Finishing
Ballizing is a fast low-cost process for sizing and finishing tubing and holes in metal. Pressing a slightly oversized tungsten carbide ball through the unfinished hole brings the hole up to desired size in seconds. The resulting surface finish is excellent and both size and finish results are very consistent. All size +.0001 -.0001
Tungsten carbide balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flowmeters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet). They are also used for inspection tools, comparative checking and gaging.
Features
Tungsten carbide itself is practically inert; any attack is usually on the binder. Since other materials are less expensive, the selection of tungsten carbide solely for corrosion resistance is usually not justified. In severely corrosive conditions, carbides with more resistant binder formulation can be supplied.
Ballizing
Low-cost, high-speed hole sizing and Finishing
Ballizing is a fast low-cost process for sizing and finishing tubing and holes in metal. Pressing a slightly oversized tungsten carbide ball through the unfinished hole brings the hole up to desired size in seconds. The resulting surface finish is excellent and both size and finish results are very consistent. All size +.0001 -.0001
For more info please click on the chart below
Item # |
IntegrationID |
A - Ball Diameter |
---|---|---|
TB-4360 |
IntegrationID
N/A 6668 |
A - Ball Diameter N/A 0.4360 in |
TB-4078 |
IntegrationID
N/A 6667 |
A - Ball Diameter N/A 0.4078 in |
TB-4073 |
IntegrationID
N/A 6666 |
A - Ball Diameter N/A 0.4073 in |
TB-4068 |
IntegrationID
N/A 6665 |
A - Ball Diameter N/A 0.4068 in |
TB-40625 |
IntegrationID
N/A 6664 |
A - Ball Diameter N/A 0.40625 in |
TB-4057 |
IntegrationID
N/A 6663 |
A - Ball Diameter N/A 0.4057 in |
TB-4052 |
IntegrationID
N/A 6662 |
A - Ball Diameter N/A 0.4052 in |
TB-4047 |
IntegrationID
N/A 6661 |
A - Ball Diameter N/A 0.4047 in |
TB-3765 |
IntegrationID
N/A 6660 |
A - Ball Diameter N/A 0.3765 in |
TB-3760 |
IntegrationID
N/A 6659 |
A - Ball Diameter N/A 0.3760 in |
TB-3755 |
IntegrationID
N/A 6658 |
A - Ball Diameter N/A 0.3755 in |
TB-37500 |
IntegrationID
N/A 6657 |
A - Ball Diameter N/A 0.3750 in |
TB-3745 |
IntegrationID
N/A 6656 |
A - Ball Diameter N/A 0.3745 in |
TB-3740 |
IntegrationID
N/A 6655 |
A - Ball Diameter N/A 0.3740 in |
TB-3735 |
IntegrationID
N/A 6654 |
A - Ball Diameter N/A 0.3735 in |
TB-3453 |
IntegrationID
N/A 6653 |
A - Ball Diameter N/A 0.3453 in |
TB-3448 |
IntegrationID
N/A 6652 |
A - Ball Diameter N/A 0.3448 in |
TB-3443 |
IntegrationID
N/A 6651 |
A - Ball Diameter N/A 0.3443 in |
TB-34375 |
IntegrationID
N/A 6650 |
A - Ball Diameter N/A 0.34375 in |
TB-3432 |
IntegrationID
N/A 6649 |
A - Ball Diameter N/A 0.3432 in |
TB-3427 |
IntegrationID
N/A 6648 |
A - Ball Diameter N/A 0.3427 in |
TB-3422 |
IntegrationID
N/A 6647 |
A - Ball Diameter N/A 0.3422 in |
TB-3140 |
IntegrationID
N/A 6646 |
A - Ball Diameter N/A 0.3140 in |
TB-3135 |
IntegrationID
N/A 6645 |
A - Ball Diameter N/A 0.3135 in |
TB-3130 |
IntegrationID
N/A 6644 |
A - Ball Diameter N/A 0.3130 in |