Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

For more information on loose joint hinges, please see: The Benefits of Loose Joint Hinges, Standard Hinges vs Loose Joint Hinges: What’s the Difference? and What Are Loose Joint Hinges?

1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 

Item #

IntegrationID

Length

Type

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

N/A
100107
N/A 1.50 in N/A A N/A 0.048 in N/A 1.00 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100108
N/A 1.50 in N/A A N/A 0.048 in N/A 1.25 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100109
N/A 2.00 in N/A A N/A 0.048 in N/A 1.50 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100110
N/A 2.50 in N/A A N/A 0.048 in N/A 1.50 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100111
N/A 2.00 in N/A A N/A 0.06 in N/A 1.25 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100112
N/A 2.00 in N/A A N/A 0.06 in N/A 1.50 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100113
N/A 2.50 in N/A A N/A 0.06 in N/A 1.50 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100114
N/A 3.00 in N/A A N/A 0.06 in N/A 2.00 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100115
N/A 3.00 in N/A A N/A 0.06 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100116
N/A 4.00 in N/A A N/A 0.06 in N/A 3.00 in N/A 0.125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100117
N/A 2.00 in N/A A N/A 0.075 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100118
N/A 2.50 in N/A A N/A 0.075 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100119
N/A 3.00 in N/A A N/A 0.075 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100120
N/A 4.00 in N/A A N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100121
N/A 2.00 in N/A A N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100122
N/A 2.50 in N/A A N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100123
N/A 2.50 in N/A A N/A 0.09 in N/A 2.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100124
N/A 3.00 in N/A A N/A 0.09 in N/A 2.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100125
N/A 3.00 in N/A A N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100126
N/A 4.00 in N/A A N/A 0.09 in N/A 4.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100127
N/A 4.00 in N/A A N/A 0.120 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100128
N/A 4.00 in N/A A N/A 0.120 in N/A 4.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100129
N/A 5 in N/A A N/A 0.120 in N/A 5.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100130
N/A 6.00 in N/A A N/A 0.120 in N/A 6.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
N/A
100131
N/A 4.00 in N/A A N/A 0.187 in N/A 3.00 in N/A 0.375 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2