AS568 Viton O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.. Viton® is also known as: Fluorocarbon and FKM. Viton® is a registered trademarks of DuPont® Dow Elastomers.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
A fluoroelastomer compound with a combination of exceptional mechanical properties and compression set resistance. This particular energizer gives an O-ring excellent memory and the ability to recover rapidly from deformation. This core has a Shore A hardness of 75 with a suggested operating temperature range of -10°F to +300°F (-23°C to +150°C) in encapsulated applications.
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | ||||||||||||||
| 432V90 |
IntegrationID
N/A 192654 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 135.89 mm5.350 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -432 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 253V75 |
IntegrationID
N/A 192351 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 136.12 mm5.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -253 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 253V90 |
IntegrationID
N/A 192352 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 136.12 mm5.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -253 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| 433V75 |
IntegrationID
N/A 192655 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -433 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 433V90 |
IntegrationID
N/A 192656 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -433 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 357V75 |
IntegrationID
N/A 192511 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 75 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -357 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 357V90 |
IntegrationID
N/A 192512 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 90 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -357 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 254V75 |
IntegrationID
N/A 192353 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 139.29 mm5.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -254 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 254V90 |
IntegrationID
N/A 192354 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 139.29 mm5.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -254 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 161V75 |
IntegrationID
N/A 192211 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 75 | Inside Diameter N/A 139.37 mm5.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -161 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 161V90 |
IntegrationID
N/A 192212 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 90 | Inside Diameter N/A 139.37 mm5.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -161 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| M-015V75 |
IntegrationID
N/A 192021 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 75 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -015 | Alternate P/N N/A 015V75 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| M-015V90 |
IntegrationID
N/A 192022 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 90 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -015 | Alternate P/N N/A 015V90 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 434V75 |
IntegrationID
N/A 192657 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -434 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries.v |
| 434V90 |
IntegrationID
N/A 192658 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -434 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 358V75 |
IntegrationID
N/A 192513 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 75 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -358 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 358V90 |
IntegrationID
N/A 192514 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 90 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -358 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 255V75 |
IntegrationID
N/A 192355 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 142.47 mm5.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -255 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 255V90 |
IntegrationID
N/A 192356 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 142.47 mm5.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -255 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 435V75 |
IntegrationID
N/A 192659 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 75 | Inside Diameter N/A 145.42 mm5.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -435 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 435V90 |
IntegrationID
N/A 192660 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 90 | Inside Diameter N/A 145.42 mm5.725 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -435 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 359V75 |
IntegrationID
N/A 192515 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 75 | Inside Diameter N/A 145.42 mm5.725 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -359 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 359V90 |
IntegrationID
N/A 192516 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 90 | Inside Diameter N/A 145.42 mm5.725 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -359 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 256V75 |
IntegrationID
N/A 192357 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 75 | Inside Diameter N/A 145.64 mm5.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -256 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
| 256V90 |
IntegrationID
N/A 192358 |
Type N/A AS568 Standard O-Ring AS568 Standard O-Rings AS568 Standard O-Rings | Material N/A Viton Viton Viton | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 90 | Inside Diameter N/A 145.64 mm5.734 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -256 | Alternate P/N N/A | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military defense and agriculture industries. |
