AS568 Silicone O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications. For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | ||||||||||||||
| 124S70 |
IntegrationID
N/A 192813 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 31.42 mm1.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -124 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 125S70 |
IntegrationID
N/A 192814 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 32.99 mm1.299 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -125 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 126S70 |
IntegrationID
N/A 192815 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 34.59 mm1.362 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -126 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 127S70 |
IntegrationID
N/A 192816 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 36.17 mm1.424 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -127 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 128S70 |
IntegrationID
N/A 192817 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 37.77 mm1.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -128 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 216S70 |
IntegrationID
N/A 192883 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 28.17 mm1.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -216 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 217S70 |
IntegrationID
N/A 192884 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 29.74 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -217 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 218S70 |
IntegrationID
N/A 192885 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 31.34 mm1.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -218 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 219S70 |
IntegrationID
N/A 192886 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 32.92 mm1.296 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -219 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 220S70 |
IntegrationID
N/A 192887 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 34.52 mm1.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -220 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 221S70 |
IntegrationID
N/A 192888 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 36.09 mm1.421 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in0.30 mmNumeric mm | Size Reference - AS568 N/A -221 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| 395S70 |
IntegrationID
N/A 193038 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.210 in5.33 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 658.88 mm25.940 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mmNumeric | Inside Diameter Tolerance +/- N/A 0.012 in3.05 mmNumeric mm | Size Reference - AS568 N/A -395 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -918 Silicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.116 in0.116 mm | Durometer N/A 75 | Inside Diameter N/A 1.355 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.012 inNumeric mm | Size Reference - AS568 N/A -918 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -918 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.116 in0.116 mm | Durometer N/A 70 | Inside Diameter N/A 1.355 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.012 inNumeric mm | Size Reference - AS568 N/A -918 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -918 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.116 in0.116 mm | Durometer N/A 90 | Inside Diameter N/A 1.355 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.012 inNumeric mm | Size Reference - AS568 N/A -918 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| M-028S70 |
IntegrationID
N/A 192768 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 34.65 mm1.364 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.013 in0.33 mmNumeric mm | Size Reference - AS568 N/A -028 | Alternate P/N N/A 028S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| M-029S70 |
IntegrationID
N/A 192769 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 37.82 mm1.489 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.013 in0.33 mmNumeric mm | Size Reference - AS568 N/A -029 | Alternate P/N N/A 029S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| M-030S70 |
IntegrationID
N/A 192770 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 41.00 mm1.614 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.013 in0.33 mmNumeric mm | Size Reference - AS568 N/A -030 | Alternate P/N N/A 030S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -920 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 70 | Inside Diameter N/A 1.475 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -920 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -924 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 70 | Inside Diameter N/A 1.720 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -924 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -920 Silicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 75 | Inside Diameter N/A 1.475 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -920 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -924 Silicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 75 | Inside Diameter N/A 1.720 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -924 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -920 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 90 | Inside Diameter N/A 1.475 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -920 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| -924 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.118 in0.118 mm | Durometer N/A 90 | Inside Diameter N/A 1.720 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.014 inNumeric mm | Size Reference - AS568 N/A -924 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
| M-031S70 |
IntegrationID
N/A 192771 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 44.17 mm1.739 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.015 in0.36 mmNumeric mm | Size Reference - AS568 N/A -031 | Alternate P/N N/A 031S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
