AS568 Fluorosilicone O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | |||||||||||||
| -429 F-70 |
IntegrationID
N/A 195183 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 126.37 mm4.975 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -429 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -250 F-70 |
IntegrationID
N/A 195032 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 126.59 mm4.984 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -250 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -159 F-70 |
IntegrationID
N/A 194963 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 126.67 mm4.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -159 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -049 F-70 |
IntegrationID
N/A 194904 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 126.72 mm4.989 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -049 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -430 F-70 |
IntegrationID
N/A 195184 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 129.54 mm5.100 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -430 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -354 F-70 |
IntegrationID
N/A 195112 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 129.54 mm5.100 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -354 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -251 F-70 |
IntegrationID
N/A 195033 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 129.77 mm5.109 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -251 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -311 F-70 |
IntegrationID
N/A 195069 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 13.64 mm0.537 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -311 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -207 F-70 |
IntegrationID
N/A 194989 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 13.87 mm0.546 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -207 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -113 F-70 |
IntegrationID
N/A 194917 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 13.94 mm0.549 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.005 in0.17 mm | Size Reference - AS568 N/A -113 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -355 F-70 |
IntegrationID
N/A 195113 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 132.72 mm5.225 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -355 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -431 F-70 |
IntegrationID
N/A 195185 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 132.72 mm5.225 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -431 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -252 F-70 |
IntegrationID
N/A 195034 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 132.94 mm5.234 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -252 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -160 F-70 |
IntegrationID
N/A 194964 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 133.02 mm5.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -160 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -050 F-70 |
IntegrationID
N/A 194905 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 133.07 mm5.239 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -050 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -432 F-70 |
IntegrationID
N/A 195186 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 135.89 mm5.350 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -432 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -356 F-70 |
IntegrationID
N/A 195114 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 135.89 mm5.350 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -356 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -253 F-70 |
IntegrationID
N/A 195035 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 136.12 mm5.359 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -253 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -357 F-70 |
IntegrationID
N/A 195115 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -357 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -433 F-70 |
IntegrationID
N/A 195187 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 139.07 mm5.475 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -433 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -254 F-70 |
IntegrationID
N/A 195036 |
Type N/A | Material N/A | Cross Section Width N/A 0.139 in3.53 mm | Durometer N/A 70 | Inside Diameter N/A 139.29 mm5.484 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -254 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -161 F-70 |
IntegrationID
N/A 194965 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 139.37 mm5.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.035 in0.89 mm | Size Reference - AS568 N/A -161 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -015 F-70 |
IntegrationID
N/A 194870 |
Type N/A | Material N/A | Cross Section Width N/A 0.070 in1.78 mm | Durometer N/A 70 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mm | Size Reference - AS568 N/A -015 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -434 F-70 |
IntegrationID
N/A 195188 |
Type N/A | Material N/A | Cross Section Width N/A 0.275 in6.99 mm | Durometer N/A 70 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.006 in0.15 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.93 mm | Size Reference - AS568 N/A -434 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
| -358 F-70 |
IntegrationID
N/A 195116 |
Type N/A | Material N/A | Cross Section Width N/A 0.210 in5.33 mm | Durometer N/A 70 | Inside Diameter N/A 142.24 mm5.600 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mm | Inside Diameter Tolerance +/- N/A 0.037 in0.94 mm | Size Reference - AS568 N/A -358 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
