AS568 Fluorosilicone O-Rings
Standard O-Rings (AS568)
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications.For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
-172 F-70 |
IntegrationID
N/A 194976 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 209.22 mm8.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.050 in1.25 mm | Size Reference - AS568 N/A -172 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-173 F-70 |
IntegrationID
N/A 194977 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 215.57 mm8.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.050 in1.25 mm | Size Reference - AS568 N/A -173 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-174 F-70 |
IntegrationID
N/A 194978 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 221.92 mm8.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.050 in1.25 mm | Size Reference - AS568 N/A -174 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-175 F-70 |
IntegrationID
N/A 194979 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 228.27 mm8.987 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.050 in1.25 mm | Size Reference - AS568 N/A -175 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-176 F-70 |
IntegrationID
N/A 194980 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 234.62 mm9.237 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -176 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-177 F-70 |
IntegrationID
N/A 194981 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 240.97 mm9.487 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -177 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-178 F-70 |
IntegrationID
N/A 194982 |
Type N/A | Material N/A | Cross Section Width N/A 0.103 in2.62 mm | Durometer N/A 70 | Inside Diameter N/A 247.32 mm9.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mm | Inside Diameter Tolerance +/- N/A 0.055 in1.40 mm | Size Reference - AS568 N/A -178 | Units of Measure N/A | Tube Size O.D. N/A | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-911 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.863 mm0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-912 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.924 mm0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-913 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 0.986 mm0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -913 | Units of Measure N/A Imperial | Tube Size O.D. N/A 13/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-914 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 1.047 mm1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -914 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-916 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 1.171 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -916 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-918 Fluorosillicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 90 | Inside Diameter N/A 1.355 mm1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-911 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.863 mm0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-912 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.924 mm0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-913 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 0.986 mm0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -913 | Units of Measure N/A Imperial | Tube Size O.D. N/A 13/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-914 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.047 mm1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -914 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-916 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.171 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -916 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-918 Fluorosillicone-75 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 75 | Inside Diameter N/A 1.355 mm1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-911 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.863 mm0.863 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -911 | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-912 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.924 mm0.924 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.009 in | Size Reference - AS568 N/A -912 | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-913 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 0.986 mm0.986 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -913 | Units of Measure N/A Imperial | Tube Size O.D. N/A 13/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-914 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.047 mm1.047 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -914 | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-916 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.171 mm1.171 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.010 in | Size Reference - AS568 N/A -916 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-918 Fluorosillicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Fluorosillicone | Cross Section Width N/A 0.116 in | Durometer N/A 70 | Inside Diameter N/A 1.355 mm1.355 in | Cross Section Tolerance +/- N/A 0.004 in | Inside Diameter Tolerance +/- N/A 0.012 in | Size Reference - AS568 N/A -918 | Units of Measure N/A Imperial | Tube Size O.D. N/A 1-1/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |