AS568 Silicone O-Rings
Silicone O-Rings
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications. For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).
Clear
Filter
Cross Section Width (in)
Cross Section Width (mm)
Cross Section Width (mm)
Inside Diameter (mm)
Inside Diameter (in)
Item # |
IntegrationID |
Type |
Material |
Cross Section Width |
Durometer |
Inside Diameter |
Cross Section Tolerance +/- |
Inside Diameter Tolerance +/- |
Size Reference - AS568 |
Alternate P/N |
Units of Measure |
Tube Size O.D. |
Call for a Quote |
O-Ring Industries |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
-903 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.064 in0.064 mm | Durometer N/A 90 | Inside Diameter N/A 0.301 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.005 inNumeric mm | Size Reference - AS568 N/A -903 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-904 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.072 in0.072 mm | Durometer N/A 90 | Inside Diameter N/A 0.351 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.005 inNumeric mm | Size Reference - AS568 N/A -904 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/4 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-905 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.072 in0.072 mm | Durometer N/A 90 | Inside Diameter N/A 0.414 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.005 inNumeric mm | Size Reference - AS568 N/A -905 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-906 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.078 in0.078 mm | Durometer N/A 90 | Inside Diameter N/A 0.468 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.005 inNumeric mm | Size Reference - AS568 N/A -906 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 3/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-907 Silicone-90 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.082 in0.082 mm | Durometer N/A 90 | Inside Diameter N/A 0.530 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.005 inNumeric mm | Size Reference - AS568 N/A -907 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 7/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
M-015S70 |
IntegrationID
N/A 192755 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 14.00 mm0.551 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mmNumeric mm | Size Reference - AS568 N/A -015 | Alternate P/N N/A 015S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
207S70 |
IntegrationID
N/A 192874 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 13.87 mm0.546 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mmNumeric mm | Size Reference - AS568 N/A -207 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
311S70 |
IntegrationID
N/A 192954 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.210 in5.33 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 13.64 mm0.537 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mmNumeric | Inside Diameter Tolerance +/- N/A 0.007 in0.17 mmNumeric mm | Size Reference - AS568 N/A -311 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-016S70 |
IntegrationID
N/A 192756 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 15.60 mm0.614 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -016 | Alternate P/N N/A 016S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-017S70 |
IntegrationID
N/A 192757 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 17.17 mm0.676 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -017 | Alternate P/N N/A 017S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-018S70 |
IntegrationID
N/A 192758 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 18.77 mm0.739 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -018 | Alternate P/N N/A 018S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-019S70 |
IntegrationID
N/A 192759 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 20.35 mm0.801 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -019 | Alternate P/N N/A 019S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-020S70 |
IntegrationID
N/A 192760 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 21.95 mm0.864 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -020 | Alternate P/N N/A 020S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
M-021S70 |
IntegrationID
N/A 192761 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.070 in1.78 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 23.52 mm0.926 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -021 | Alternate P/N N/A 021S70 | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
114S70 |
IntegrationID
N/A 192803 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 15.54 mm0.612 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -114 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
115S70 |
IntegrationID
N/A 192804 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 17.12 mm0.674 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -115 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
116S70 |
IntegrationID
N/A 192805 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.103 in2.62 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 18.72 mm0.737 in | Cross Section Tolerance +/- N/A 0.003 in0.08 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -116 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
208S70 |
IntegrationID
N/A 192875 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 15.47 mm0.609 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.23 mmNumeric mm | Size Reference - AS568 N/A -208 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
209S70 |
IntegrationID
N/A 192876 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.139 in3.53 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 17.04 mm0.671 in | Cross Section Tolerance +/- N/A 0.004 in0.10 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.23 mmNumeric mm | Size Reference - AS568 N/A -209 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
312S70 |
IntegrationID
N/A 192955 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.210 in5.33 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 15.24 mm0.600 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -312 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
313S70 |
IntegrationID
N/A 192956 |
Type N/A Long Text | Material N/A Long Text | Cross Section Width N/A 0.210 in5.33 mmNumeric mm | Durometer N/A 70 | Inside Diameter N/A 16.81 mm0.662 in | Cross Section Tolerance +/- N/A 0.005 in0.12 mmNumeric | Inside Diameter Tolerance +/- N/A 0.009 in0.22 mmNumeric mm | Size Reference - AS568 N/A -313 | Alternate P/N N/A | Units of Measure N/A Long Text | Tube Size O.D. N/A Numeric | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |
-908 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.087 in0.087 mm | Durometer N/A 70 | Inside Diameter N/A 0.644 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.009 inNumeric mm | Size Reference - AS568 N/A -908 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 1/2 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-909 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.097 in0.097 mm | Durometer N/A 70 | Inside Diameter N/A 0.706 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.009 inNumeric mm | Size Reference - AS568 N/A -909 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 9/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-910 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.097 in0.097 mm | Durometer N/A 70 | Inside Diameter N/A 0.755 in | Cross Section Tolerance +/- N/A 0.003 inNumeric | Inside Diameter Tolerance +/- N/A 0.009 inNumeric mm | Size Reference - AS568 N/A -910 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 5/8 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. | |
-911 Silicone-70 | Type N/A AS568 Standard O-Rings | Material N/A Silicone | Cross Section Width N/A 0.116 in0.116 mm | Durometer N/A 70 | Inside Diameter N/A 0.863 in | Cross Section Tolerance +/- N/A 0.004 inNumeric | Inside Diameter Tolerance +/- N/A 0.009 inNumeric mm | Size Reference - AS568 N/A -911 | Alternate P/N N/A | Units of Measure N/A Imperial | Tube Size O.D. N/A 11/16 | Call for a Quote N/A | O-Ring Industries N/A O-rings are used in the military, automotive, aerospace and agriculture industries. |