The Silent-Lign range solves your complex engineering problems both in new product design and replacement on noisy, new and used equipment. Field proven, these assemblies offer low initial cost, low maintenance cost, and a minimum of parts.

Silent-Lign bearings are oil impregnated. The porous bronze sleeve acts as a metallic sponge. It constantly obtains sufficient lubrication through absorption with the application of a few drops of oil as necessary.

The neoprene wall is an oil-resistant flexing medium. It can take up a high angle of torsional movement. As the amount of misalignment increases, the thickness of the neoprene is increased and its length is reduced. This permits the entire I.D. of the bearing to be utilized, with no shaft gall at the edges. Similarly, the neoprene wall silences vibrations and eliminates the transmission of noise. Insulated with Neoprene, these pillow blocks accommodate shaft misalignment to provide extremely quiet operation.

    Features
  • Accommodate Maximum Misalignment
  • Require No Line Reaming
  • Reduce Noise and Vibration
  • Self-Lubricate Constantly with Porous Bronze Sleeve
  • Serve a variety of Light and Medium Load Applications
  • Quiets New and Used Equipment

1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

Length

Type

Inside Diameter

Inside Diameter

N/A
103569
N/A 1.25 in N/A B N/A 5/8 Fraction N/A .626-.627 in
N/A
103570
N/A 1.25 in N/A B N/A 3/4 Fraction N/A .751-.752 in
N/A
103577
N/A 1.25 in N/A B N/A 9/16 Fraction N/A .566-.567 in
N/A
103578
N/A 1.25 in N/A B N/A 11/16 Fraction N/A .688-.689 in
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1