Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

    On request:
    Special versions and spacer rings.

    (Kipp Original Design)
  • 26 - 32 of 32 | Results Per Page | View | Unit of Measure
    1 2 

    Item #

    IntegrationID

    Material

    Style

    L

    D

    H

    Size

    D2

    L2

    L3

    L1

    D1

    F x 30°

    SW1

    Diameter

    Stud Length

    N/A
    77811
    N/A Stainless Steel N/A D N/A 38.50 mm N/A 4.00 mm N/A 4.00 mm N/A 0.00 mm N/A 18.00 mm N/A 6.00 mm N/A 13.00 mm N/A 15.00 mm N/A 5/16-24 in N/A 1.00 mm N/A 10.00 mm N/A N/A
    N/A
    77812
    N/A Stainless Steel N/A D N/A 43.50 mm N/A 5.00 mm N/A 5.00 mm N/A 1.00 mm N/A 21.00 mm N/A 7.00 mm N/A 15.00 mm N/A 17.00 mm N/A 3/8-24 in N/A 1.30 mm N/A 13.00 mm N/A N/A
    N/A
    77813
    N/A Stainless Steel N/A D N/A 51.70 mm N/A 6.00 mm N/A 6.00 mm N/A 2.00 mm N/A 25.00 mm N/A 8.00 mm N/A 17.00 mm N/A 20.00 mm N/A 1/2-13 in N/A 1.80 mm N/A 14.00 mm N/A N/A
    N/A
    77814
    N/A Stainless Steel N/A D N/A 68.00 mm N/A 8.00 mm N/A 8.00 mm N/A 3.00 mm N/A 33.00 mm N/A 10.00 mm N/A 23.00 mm N/A 26.00 mm N/A 5/8-11 in N/A 2.30 mm N/A 19.00 mm N/A N/A
    N/A
    77815
    N/A Stainless Steel N/A D N/A 74.00 mm N/A 10.00 mm N/A 10 mm N/A 4.00 mm N/A 33.00 mm N/A 12.00 mm N/A 25.00 mm N/A 28.00 mm N/A 3/4-10 in N/A 2.80 mm N/A 22.00 mm N/A N/A
    N/A
    77816
    N/A Stainless Steel N/A D N/A 78.00 mm N/A 12.00 mm N/A 12 mm N/A 4.00 mm N/A 33.00 mm N/A 14.00 mm N/A 25.00 mm N/A 28.00 mm N/A 3/4-16 in N/A 2.80 mm N/A 22.00 mm N/A N/A
    N/A
    77817
    N/A Stainless Steel N/A D N/A 96.00 mm N/A 16.00 mm N/A 16 mm N/A 5.00 mm N/A 40.00 mm N/A 18.00 mm N/A 28.00 mm N/A 32.00 mm N/A 1-8 in N/A 3.20 mm N/A 27.00 mm N/A N/A
    26 - 32 of 32 | Results Per Page | View | Unit of Measure
    1 2