Material:
• Steel version, locking pin hardened:  quality class 5.8
• Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
• Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite grey thermoplastic

Surface finish:
• Steel version, locking pin hardened:  black oxide finish, locking pin ground
• Stainless steel version, locking pin hardened: natural finish, locking pin ground
• Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Locking Bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

On request:
Special versions and spacer rings.

26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2 

Item #

Item Name

IntegrationID

Style

L

D

H

D2

L2

L3

L1

D1

F x 30°

L4

SW1

SW2

End Pressure Initial-Final

N/A All SS Plunger Indexing Plungers N/A
76100
N/A D N/A N/A 4.00 mm N/A 4.00 mm N/A 18.00 mm N/A 6.00 mm N/A 13.00 mm N/A 15.00 mm N/A 5/16-24 in N/A 1.00 mm N/A 38.50 mm N/A 10.00 mm N/A 1/2 in N/A
N/A All SS Plunger Indexing Plungers N/A
76101
N/A D N/A N/A 5.00 mm N/A 5.00 mm N/A 21.00 mm N/A 7.00 mm N/A 15.00 mm N/A 17.00 mm N/A 3/8-24 in N/A 1.30 mm N/A 43.50 mm N/A 13.00 mm N/A 9/16 in N/A
N/A All SS Plunger Indexing Plungers N/A
76102
N/A D N/A N/A 6.00 mm N/A 6.00 mm N/A 25.00 mm N/A 8.00 mm N/A 17.00 mm N/A 20.00 mm N/A 1/2-13 in N/A 1.80 mm N/A 52.00 mm N/A 14.00 mm N/A 3/4 in N/A
N/A All SS Plunger Indexing Plungers N/A
76103
N/A D N/A N/A 8.00 mm N/A 8.00 mm N/A 33.00 mm N/A 10.00 mm N/A 23.00 mm N/A 26.00 mm N/A 5/8-11 in N/A 2.30 mm N/A 68.00 mm N/A 19.00 mm N/A 15/16 in N/A
N/A All SS Plunger Indexing Plungers N/A
76104
N/A D N/A N/A 10.00 mm N/A 10 mm N/A 33.00 mm N/A 12.00 mm N/A 25.00 mm N/A 28.00 mm N/A 3/4-10 in N/A 2.60 mm N/A 74.00 mm N/A 22.00 mm N/A 1-1/8 in N/A
N/A All SS Plunger Indexing Plungers N/A
76105
N/A D N/A N/A 12.00 mm N/A 12 mm N/A 33.00 mm N/A 14.00 mm N/A 25.00 mm N/A 28.00 mm N/A 3/4-16 in N/A 2.80 mm N/A 78.00 mm N/A 22.00 mm N/A 1-1/8 in N/A
N/A All SS Plunger Indexing Plungers N/A
76106
N/A D N/A N/A 16.00 mm N/A 16 mm N/A 40.00 mm N/A 18.00 mm N/A 28.00 mm N/A 32.00 mm N/A 1-8 in N/A 3.20 mm N/A 96.00 mm N/A 27.00 mm N/A 1-1/2 in N/A
26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2