Material:
Plate steel, damper plate PUR elastomere (Sylomer V12)

Surface finish:
Plate blue chromated; damper plate gray, fixed, cannot slip. Range of use from -30 °C to +70 °C

Note:
The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Locating Foot.

(Kipp Original Design)
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

D

H

D2

D1

Load capacity (under pressure of 0.4 N/mm²)

H1 (under pressure of 0 / 0.4 / 0.6 N/mm²)

Max Load

Stud Length

Sort by
N/A
78153
N/A 36.00 mm N/A 15 mm N/A 5.50 mm N/A 31.00 mm N/A 212 N N/A 4 / 2.8 / 1.9 mm N/A N/A
N/A
78154
N/A 46.00 mm N/A 17.00 mm N/A 6.60 mm N/A 41.00 mm N/A 435 N N/A 4 / 2.8 / 1.9 mm N/A N/A
N/A
78155
N/A 56.00 mm N/A 19 mm N/A 9.00 mm N/A 50.00 mm N/A 705 N N/A 4 / 2.8 / 1.9 mm N/A N/A
N/A
78156
N/A 74.00 mm N/A 21.00 mm N/A 9.00 mm N/A 68.00 mm N/A 1372 N N/A 4 / 2.8 / 1.9 mm N/A N/A
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1