Adjustable Handles CastersCrank Handles FastenersFine Adjusters Handles Handwheels Hinges Hoist Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding Gaga codePh: 877-740-2007
Fax: 800-453-9683

Hours of Operation:
8am - 6pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

General Terms & Conditions of Sale of Goods

General Supplier
Terms & Conditions 
Search Catalog
        
 All Categories    Leveling Pads with Vibration Absorption - Metric
All Categories > Leveling Mounts, Leveling Feet and Leveling Pads > Level Pads (3 Styles) > Leveling Pads with Vibration Absorption - Metric > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Leveling Pads with Vibration Absorption - Metric

 
Check up to five results to perform an action.


Material:

  • Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel
  • Stainless steel version: pressure foot and ball element in stainless steel

    • Surface finish:

  • Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish
  • Stainless steel version: natural finish

    • Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).

    Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.


    		   
      Results 1 - 8 of 8 Unit of Measure: Imperial Metric Both 1 

    Item #

    Material

    D2

    D3

    H2

    H1

    T

    D1

    SW

    H3 (under pressure of 0 / 0.4 / 0.6 N/mm²)

    Load capacity (under pressure of 0.4 N/mm²)

    Max Load

    Stud Length
    M66785 Steel 32.00 mm 31.00 mm 5.00 mm 22.00 mm 10.00 mm M10 mm 17 mm 8 / 6.8 / 5.9 mm 212 N N/A N/A
    M66786 Steel 40.00 mm 31.00 mm 6.00 mm 26.00 mm 12.00 mm M12 mm 19 mm 8 / 6.8 / 5.9 mm 212 N N/A N/A
    M66787 Steel 50.00 mm 41.00 mm 7.0 mm 32.00 mm 14.00 mm M16 mm 24 mm 8 / 6.8 / 5.9 mm 435 N N/A N/A
    M66788 Steel 60.00 mm 50.00 mm 8.00 mm 42.00 mm 18.00 mm M20 mm 30 mm 8 / 6.8 / 5.9 mm 705 N N/A N/A
    M66793 Stainless Steel 32.00 mm 31.00 mm 5.00 mm 22.00 mm 10.00 mm M10 mm 17 mm 8 / 6.8 / 5.9 mm 212 N N/A N/A
    M66794 Stainless Steel 40.00 mm 31.00 mm 6.00 mm 26.00 mm 12.00 mm M12 mm 19 mm 8 / 6.8 / 5.9 mm 212 N N/A N/A
    M66795 Stainless Steel 50.00 mm 41.00 mm 7.0 mm 32.00 mm 14.00 mm M16 mm 24 mm 8 / 6.8 / 5.9 mm 435 N N/A N/A
    M66796 Stainless Steel 60.00 mm 50.00 mm 8.00 mm 42.00 mm 18.00 mm M20 mm 30 mm 8 / 6.8 / 5.9 mm 705 N N/A N/A
      Results 1 - 8 of 8 1 
    Monroe Engineering