Material:

  • Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel
  • Stainless steel version: pressure foot and ball element in stainless steel
  • Surface finish:

  • Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish
  • Stainless steel version: natural finish
  • Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).

    Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.

    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    Material

    D2

    D3

    H2

    H1

    T

    D1

    SW

    H3 (under pressure of 0 / 0.4 / 0.6 N/mm²)

    Load capacity (under pressure of 0.4 N/mm²)

    Max Load

    Stud Length

    N/A
    78145
    N/A Steel N/A 32.00 mm N/A 31.00 mm N/A 5.00 mm N/A 22.00 mm N/A 10.00 mm N/A M10 mm N/A 17 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78146
    N/A Steel N/A 40.00 mm N/A 31.00 mm N/A 6.00 mm N/A 26.00 mm N/A 12.00 mm N/A M12 mm N/A 19 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78147
    N/A Steel N/A 50.00 mm N/A 41.00 mm N/A 7.0 mm N/A 32.00 mm N/A 14.00 mm N/A M16 mm N/A 24 mm N/A 8 / 6.8 / 5.9 mm N/A 435 N N/A N/A
    N/A
    78148
    N/A Steel N/A 60.00 mm N/A 50.00 mm N/A 8.00 mm N/A 42.00 mm N/A 18.00 mm N/A M20 mm N/A 30 mm N/A 8 / 6.8 / 5.9 mm N/A 705 N N/A N/A
    N/A
    78149
    N/A Stainless Steel N/A 32.00 mm N/A 31.00 mm N/A 5.00 mm N/A 22.00 mm N/A 10.00 mm N/A M10 mm N/A 17 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78150
    N/A Stainless Steel N/A 40.00 mm N/A 31.00 mm N/A 6.00 mm N/A 26.00 mm N/A 12.00 mm N/A M12 mm N/A 19 mm N/A 8 / 6.8 / 5.9 mm N/A 212 N N/A N/A
    N/A
    78151
    N/A Stainless Steel N/A 50.00 mm N/A 41.00 mm N/A 7.0 mm N/A 32.00 mm N/A 14.00 mm N/A M16 mm N/A 24 mm N/A 8 / 6.8 / 5.9 mm N/A 435 N N/A N/A
    N/A
    78152
    N/A Stainless Steel N/A 60.00 mm N/A 50.00 mm N/A 8.00 mm N/A 42.00 mm N/A 18.00 mm N/A M20 mm N/A 30 mm N/A 8 / 6.8 / 5.9 mm N/A 705 N N/A N/A
    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1 

    Are you looking for a quote?

    About Monroe
    About Monroe

    Experience

    Over 60 years of manufacturing experience to best server our customers

    Read More >>

    Our Custom Manufacturing

    Capabilities

    Monroe provides custom manufacturing solutions to clients throughout the world

    Read More >>

    See ways we provide value

    Values

    Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

    Read More >>

    Commited to Quality

    Commitment

    Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

    Read More >>