Digital Position Indicator - Direct Drive
Installation Instructions for DD51 and DD52
1. Zero set the spindle.
2. Fit the indicator onto the spindle.
3. Mark the machine frame by means of the rear locating pin by rotating the indicator (do not use a hammer).
4. Pull out the indicator and drill a ø 6mm by 10mm deep hole.
5. Re-fit the zeroed indicator onto the spindle and make sure the rear pin locates into the hole.
6. Tighten the socket head set screw.

Elesa Original Design
1 - 16 of 16 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

RPM (Max.)

Type

Reading After 1 Revolution

Clockwise / Counter clockwise Rotation direction increasing

Note

Sort by
N/A
1632
N/A 500 N/A AN N/A 000.50 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1633
N/A 500 N/A AN N/A 000.50 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1634
N/A 250 N/A AN N/A 001.00 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1635
N/A 250 N/A AN N/A 001.00 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1636
N/A 1500 N/A AN N/A 0001.00 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1637
N/A 1500 N/A AN N/A 0001.00 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1638
N/A 1250 N/A AN N/A 0002.0 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1639
N/A 1250 N/A AN N/A 0002.0 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1640
N/A 500 N/A AR N/A 000.50 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1641
N/A 500 N/A AR N/A 000.50 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1642
N/A 250 N/A AR N/A 001.00 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1643
N/A 250 N/A AR N/A 001.00 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1644
N/A 500 N/A FN N/A 000.50 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1645
N/A 500 N/A FN N/A 000.50 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1646
N/A 250 N/A FN N/A 001.00 N/A Clockwise N/A Please do not use a hammer for installation tip 3.
N/A
1647
N/A 250 N/A FN N/A 001.00 N/A Counter Clockwise N/A Please do not use a hammer for installation tip 3.
1 - 16 of 16 | Results Per Page | View | Unit of Measure
1