Print Back

The Long-Lok thread lock provides additional resistance to vibration. The resilient nylon insert is squeezed like a wedge between the thread of the plunger and fastening component, providing extreme high loosening torque. The Long-Loc thread lock does not require initial tension or and defined position so that it is secured in every position. All plungers are pressure and function tested.

  • Slotted drive
  • Extended nose length

Slotted - Light/Medium Pressure - Long-Lok Thread - Inch
Slotted - Light/Medium Pressure - Long-Lok Thread - Inch
Unit of Measure
1 

Item #

CAD

IntegrationID

Material

Body Length

Ball Height

Ball Diameter

Thread Size

End Pressure Initial-Final

Quantity
KPML3001 N/A N/A
2882
N/A Steel N/A 9.00 mm N/A 1.50 mm N/A 1.80 mm N/A M4 N/A 2.00 to 7.00
KPML3002 N/A N/A
2883
N/A Steel N/A 12.00 mm N/A 2.00 mm N/A 2.40 mm N/A M5 N/A 3.00 to 10.00
KPML3003 N/A N/A
2884
N/A Steel N/A 14.00 mm N/A 2.00 mm N/A 2.70 mm N/A M6 N/A 3.00 to 9.00
KPML3004 N/A N/A
2885
N/A Steel N/A 16.00 mm N/A 2.00 mm N/A 4.00 mm N/A M8 N/A 4.00 to 16
KPML3005 N/A N/A
2886
N/A Steel N/A 19.00 mm N/A 2.50 mm N/A 4.50 mm N/A M10 N/A 4.00 to 16
KPML3006 N/A N/A
2887
N/A Steel N/A 22.00 mm N/A 3.50 mm N/A 6.00 mm N/A M12 N/A 5.00 to 27
KPML3007 N/A N/A
2888
N/A Steel N/A 24.00 mm N/A 4.50 mm N/A 8.50 mm N/A M16 N/A 20.00 to 45.00
KPMM3001 N/A N/A
11719
N/A Steel N/A 9.00 mm N/A 1.50 mm N/A 1.80 mm N/A M4 N/A 6.00 to 20
KPMM3002 N/A N/A
11720
N/A Steel N/A 12.00 mm N/A 2.00 mm N/A 2.40 mm N/A M5 N/A 6.00 to 20
KPMM3003 N/A N/A
11721
N/A Steel N/A 14.00 mm N/A 2.00 mm N/A 2.70 mm N/A M6 N/A 7.00 to 20
KPMM3004 N/A N/A
11722
N/A Steel N/A 16.00 mm N/A 2.00 mm N/A 4.00 mm N/A M8 N/A 15.00 to 30.00
KPMM3005 N/A N/A
11723
N/A Steel N/A 19.00 mm N/A 2.50 mm N/A 4.50 mm N/A M10 N/A 20.00 to 35
KPMM3006 N/A N/A
11724
N/A Steel N/A 22.00 mm N/A 3.50 mm N/A 6.00 mm N/A M12 N/A 30.00 to 55.00
KPMM3007 N/A N/A
11725
N/A Steel N/A 24.00 mm N/A 4.50 mm N/A 8.50 mm N/A M16 N/A 45.00 to 100.00
Unit of Measure
1