Print Back
Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications. For more information, please see: Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart. EP is also known as: Eythylene Propylene, EPR, EPDM, EPT, E.

EP is an elastomer which is characterized by wide range of applications and good chemical resistance. Ethylene propylene compounds have good resistance to detergents, alkalis, mild acids, greases, silicone oils, and alcohols.
Unit of Measure

Specifications

Type

N/A AS568 Standard O-Rings AS568 Standard O-Rings

Material

N/A EP EP

Cross Section Width

N/A 0.116 in

Durometer

N/A 70

Inside Diameter

N/A 1.171 mm1.171 in

Cross Section Tolerance +/-

N/A 0.004 in

Inside Diameter Tolerance +/-

N/A 0.01 in

Size Reference - AS568

N/A -916

Units of Measure

N/A Imperial Imperial

Tube Size O.D.

N/A 1 3/32

O-Ring Industries

N/A O-rings are used in the military defense and agriculture industries.