Wave spring washers are normally used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80% of available deflection.Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.
Stainless Steel - Commercial Type 302 & Government AMS 5906 (Chemical only) - Type 302
High Carbon Steel - Commercial 1074-1095– Certified to ASTM-A684 & Commercial 1074– Certified to ASTM-A684
Finish - Washers are carried in stock in plain finish suitable for various types of finishes: either electroplated or mechanically plated (a process which reduces the possibility of hydrogen embrittlement). Please call us for recommendations on special or specific applications.
Weight |
N/A 0.001164 pounds |
Material |
N/A 302 Stainless Steel (Commercial) AMS 5906 (Chemical) |
Height |
N/A 1.004 inches |
Depth |
N/A 0.071 inches |
Width |
N/A 0.071 inches |
Country of Origin |
N/A US |
Thickness (In.) |
N/A 0.0105 Inch |
Free Height (Approx) (In.) |
N/A 0.071 Inch |
Nominal Spring Rate (lbs/In.) |
N/A 236 lbs/in |
Inside Diameter (In.) |
N/A 0.780 Inch |
Outside Diameter (In.) |
N/A 1.004 Inch |
# of Waves |
N/A 3 |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
