Our plastic ball bearings are well suited for other applications like wash down areas, where equipment is frequently wet and prone to rusting with conventional bearings. Corrosive environments, where bearings will be subject to chemical abrasiveness, are also a good fit for plastic ball bearings. Whether you need to move relatively low loads and RPM, or the heaviest industrial equipment, Monroe has the right bearing to keep your operation moving along. Even if your equipment is located in such a way to make bearing lubrication access difficult, it's no problem because our bearings are self-lubricating.
Unit of Measure
Items
Bearings Radial Plastic Inches R03-ASA

Radial Bearings - Inch

Bearings Radial Plastic Inches R04-ASA

Radial Bearings - Inch

Bearings Radial Plastic Inches R04A-ASA

Radial Bearings - Inch

Bearings Radial Plastic Inches R04B-ASA

Radial Bearings - Inch

Bearings Radial Plastic Inches R06-ASA

Radial Bearings - Inch
Width N/A 5/32 N/A .196 N/A 7/32 N/A 9/32 N/A 7/32
Inside Diameter N/A 3/16 N/A 1/4 N/A 1/4 N/A 1/4 N/A 3/8
Outside Diameter N/A 1/2 N/A 5/8 N/A 0.75 N/A 0.75 N/A 0.875
Series N/A R03 N/A R04 N/A R04A N/A R04B N/A R06
Notes N/A Jilson plastic ball bearings are well suited for other applications like wash down areas, where equipment is frequently wet and prone to rusting with conventional bearings. Corrosive environments, where bearings will be subject to chemical abrasiveness, a We use top grade materials such as: Acetal, Nylon, Polypropylene, Polyethylene, KYNAR, PETP, PBT, PEEK, Ceramic and Stainless Steel in different combinations to meet specific needs. Jilson’s housings for plastic bearings are made of high-grade, solid PBT
Rows N/A Single
Races N/A Acetal
Cage N/A Glass
Balls N/A SS
Load Capacity - Static (lbs) N/A 8 N/A 12 N/A 12 N/A 12 N/A 33
Load Capacity - Dynamic (lbs) N/A 12 N/A 26 N/A 26 N/A 26 N/A 42
Max RPM in Air N/A 3050 N/A 2352 N/A 2352 N/A 2352 N/A 1600
Inside Diameter Range N/A 3/16 in N/A 1/4 in N/A 1/4 in N/A 1/4 in N/A 3/8 in
Outside Diameter Range N/A 1/2 in N/A 5/8 in N/A 3/4 in N/A 3/4 in N/A 7/8 in
Width N/A 5/32 N/A .196 N/A 7/32 N/A 9/32 N/A 7/32
Load Capacity - Static (lbs) Range N/A 0-20 N/A 0-20 N/A 0-20 N/A 0-20 N/A 21-40
Load Capacity - Dynamic (lbs) Range N/A 0-20 N/A 21-40 N/A 21-40 N/A 21-40 N/A 41-60